RHEL/CentOS-6 HA NFS Configuration Question

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I have an existing CentOS-5 cluster I've configured for High-Availability NFS (v3).  Everything is working fine.  I've included a simplified cluster.conf file below.

I originally started with 3 file servers that were not clustered.  I converted to a clustered configuration where my NFS Clients never get "stale nfs" error messages.  When a node failed, all NFS exports (and their associated IP address) would  move to another system faster than my clients could time out.

I understand that changes to the portmapper in EL6 and NFSv4 make it much more difficult to configure HA-NFS and, so far, I have not seen any good documentation on how to configure a HA-NFS configuration in EL6.

Does anyone have any suggestions, or links to documentation that you can send me?

-RZ

p.s.  Simplified cluster.conf file for EL5...
<?xml version="1.0"?>
<cluster alias="ha-nfs-el5" config_version="357" name="ha-nfs-el5">
	<fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="3"/>
	<clusternodes>
		<clusternode name="node01.arlut.utexas.edu" nodeid="1" votes="1">
			<fence>
				<method name="1">
					<device name="node01-ilo"/>
				</method>
				<method name="2">
					<device name="sanbox01" port="0"/>
				</method>
			</fence>
		</clusternode>
		<clusternode name="node02.arlut.utexas.edu" nodeid="2" votes="1">
			<fence>
				<method name="1">
					<device name="node02-ilo"/>
				</method>
				<method name="2">
					<device name="sanbox02" port="0"/>
				</method>
			</fence>
		</clusternode>
		<clusternode name="node03.arlut.utexas.edu" nodeid="3" votes="1">
			<fence>
				<method name="1">
					<device name="node03-ilo"/>
				</method>
				<method name="2">
					<device name="sanbox03" port="0"/>
				</method>
			</fence>
		</clusternode>
	</clusternodes>
	<cman/>
	<fencedevices>
		<fencedevice agent="fence_sanbox2" ipaddr="sanbox01.arlut.utexas.edu" login="admin" name="sanbox01" passwd="password"/>
		<fencedevice agent="fence_sanbox2" ipaddr="sanbox02.arlut.utexas.edu" login="admin" name="sanbox02" passwd="password"/>
		<fencedevice agent="fence_sanbox2" ipaddr="sanbox03.arlut.utexas.edu" login="admin" name="sanbox03" passwd="password"/>
		<fencedevice agent="fence_ilo" hostname="node01-ilo" login="Administrator" name="node01-ilo" passwd="DUMMY"/>
		<fencedevice agent="fence_ilo" hostname="node02-ilo" login="Administrator" name="node02-ilo" passwd="DUMMY"/>
		<fencedevice agent="fence_ilo" hostname="node03-ilo" login="Administrator" name="node03-ilo" passwd="DUMMY"/>
	</fencedevices>
	<rm>
		<failoverdomains>
			<failoverdomain name="nfs1-domain" nofailback="1" ordered="1" restricted="1">
				<failoverdomainnode name="node01.arlut.utexas.edu" priority="1"/>
				<failoverdomainnode name="node02.arlut.utexas.edu" priority="2"/>
				<failoverdomainnode name="node03.arlut.utexas.edu" priority="3"/>
			</failoverdomain>
			<failoverdomain name="nfs2-domain" nofailback="1" ordered="1" restricted="1">
				<failoverdomainnode name="node01.arlut.utexas.edu" priority="3"/>
				<failoverdomainnode name="node02.arlut.utexas.edu" priority="1"/>
				<failoverdomainnode name="node03.arlut.utexas.edu" priority="2"/>
			</failoverdomain>
			<failoverdomain name="nfs3-domain" nofailback="1" ordered="1" restricted="1">
				<failoverdomainnode name="node01.arlut.utexas.edu" priority="2"/>
				<failoverdomainnode name="node02.arlut.utexas.edu" priority="3"/>
				<failoverdomainnode name="node03.arlut.utexas.edu" priority="1"/>
			</failoverdomain>
		</failoverdomains>
		<resources>
			<ip address="192.168.1.1" monitor_link="1"/>
			<ip address="192.168.1.2" monitor_link="1"/>
			<ip address="192.168.1.3" monitor_link="1"/>
			<fs device="/dev/cvg00/volume01" force_fsck="0" force_unmount="1" fsid="49388" fstype="ext3" mountpoint="/lvm/volume01" name="volume01" self_fence="0"/>
			<fs device="/dev/cvg00/volume02" force_fsck="0" force_unmount="1" fsid="58665" fstype="ext3" mountpoint="/lvm/volume01" name="volume01" self_fence="0"/>
			<fs device="/dev/cvg00/volume03" force_fsck="0" force_unmount="1" fsid="61028" fstype="ext3" mountpoint="/lvm/volume01" name="volume01" self_fence="0"/>
			<nfsclient allow_recover="1" name="local-subnet" options="rw,insecure" target="192.168.1.0/24"/>
		</resources>
		<service autostart="1" domain="nfs1-domain" exclusive="0" name="nfs1" nfslock="1" recovery="relocate">
			<ip ref="192.168.1.1">
				<fs __independent_subtree="1" ref="volume01">
					<nfsexport name="nfs-cvg00-brazos02">
						<nfsclient name=" " ref="local-subnet"/>
					</nfsexport>
				</fs>
			</ip>
		</service>
		<service autostart="1" domain="nfs2-domain" exclusive="0" name="nfs2" nfslock="1" recovery="relocate">
			<ip ref="192.168.1.2">
				<fs __independent_subtree="1" ref="volume02">
					<nfsexport name="nfs-sdd01-data02">
						<nfsclient name=" " ref="local-subnet"/>
					</nfsexport>
				</fs>
			</ip>
		</service>
		<service autostart="1" domain="nfs3-domain" exclusive="0" name="nfs3" nfslock="1" recovery="relocate">
			<ip ref="192.168.1.3">
				<fs __independent_subtree="1" ref="volume03">
						<nfsclient name=" " ref="local-subnet"/>
					</nfsexport>
				</fs>
			</ip>
		</service>
	</rm>
</cluster>

-- 
Randy Zagar                               Sr. Unix Systems Administrator
E-mail: zagar@xxxxxxxxxxxxxxxx            Applied Research Laboratories
Phone: 512 835-3131                       Univ. of Texas at Austin

 

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature

--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster

[Index of Archives]     [Corosync Cluster Engine]     [GFS]     [Linux Virtualization]     [Centos Virtualization]     [Centos]     [Linux RAID]     [Fedora Users]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite Camping]

  Powered by Linux