Hi,
We are setting up a new cluster and we still have tests and questions.
At present, our cluster is two nodes only, with a very simple setup.
fencing is done with fence_ipmilan, and the only action we do is rebooting.
Today, I tried to completely switch both nodes off, then boot up node 1.
It perfectly boots up and serves as it should.
But detecting the missing one, fencing is ran on node 2 and boots it up.
I would like to avoid that, and keep the stopped nodes stopped.
I don't know if there's a way I could improve my cluster.conf to do that?
Either improve my fencedevice command, but I did not find many more
option in the fence_ipmilan man page...
Either there's a way to first do a test (?) before doing any further action?
I'd be glad to read your advice.
My setup :
[...]
<clusternodes>
<clusternode name="node1" nodeid="1">
<fence>
<method name="1">
<device name="node1_ipmi" action="reboot"/>
</method>
</fence>
</clusternode>
<clusternode name="node2" nodeid="2">
<fence>
<method name="1">
<device name="node2_ipmi" action="reboot"/>
</method>
</fence>
</clusternode>
</clusternodes>
<fencedevices>
<fencedevice name="node1_ipmi" agent="fence_ipmilan" ipaddr="c-node1"
login="alogin" passwd="apwd"/>
<fencedevice name="node2_ipmi" agent="fence_ipmilan" ipaddr="c-node2"
login="alogin" passwd="apwd"/>
</fencedevices>
[...]
Regards,
--
Nicolas Ecarnot
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
