Your server hostname & name you specify in cluster.conf file for cluster node name should be same.is this 2 value are different.
if values are different make it similar and check.
Regards
Umesh Susvirkar
On Mon, Dec 27, 2010 at 12:38 PM, sandeeep <sandy.rhce@xxxxxxxxx> wrote:
Hi,
I am using RHEL5.4 and trying to make cluster using conga, i did
every thing, like in main server i installed luci* cluster* related
package using :"yum groupinstall luci* cluster*,
and same time installed cman*
and in other two nodes i have installed ricci* packege using yum.
now every thing is done, but in server when i am running "service cman
restart" its giving an error like " local node name is not found in
main conficuration file and /usr/sbin/cman_tool: aisex daemon not
started ." please have a look into my querry, as i am facing this
problem since many days.
THanks
Sandeep
On 12/24/10, linux-cluster-request@xxxxxxxxxx
<linux-cluster-request@xxxxxxxxxx> wrote:
> Send Linux-cluster mailing list submissions to
> linux-cluster@xxxxxxxxxx
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://www.redhat.com/mailman/listinfo/linux-cluster
> or, via email, send a message with subject or body 'help' to
> linux-cluster-request@xxxxxxxxxx
>
> You can reach the person managing the list at
> linux-cluster-owner@xxxxxxxxxx
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Linux-cluster digest..."
>
>
> Today's Topics:
>
> 1. IP Resource behavior with Red Hat Cluster (Parvez Shaikh)
> 2. Re: IP Resource behavior with Red Hat Cluster
> (Rajagopal Swaminathan)
> 3. Re: IP Resource behavior with Red Hat Cluster (Parvez Shaikh)
> 4. Re: IP Resource behavior with Red Hat Cluster (Jakov Sosic)
> 5. Re: IP Resource behavior with Red Hat Cluster (Parvez Shaikh)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 24 Dec 2010 11:03:12 +0530
> From: Parvez Shaikh <parvez.h.shaikh@xxxxxxxxx>
> To: linux-cluster@xxxxxxxxxx
> Subject: IP Resource behavior with Red Hat Cluster
> Message-ID:
> <AANLkTin5PGXoHiLq_5wTfaA-HRcUxcF1hGzGd-1WQP3t@xxxxxxxxxxxxxx>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hi all,
>
> I am using Red Hat cluster 6.2.0 (version shown with cman_tool
> version) on Red Hat 5.5
>
> I am on host that has multiple network interfaces and all(or some) of
> which may be active while I tried to bring up my IP resource up.
>
> My cluster is of simple configuration -
> It has only 2 nodes, and service basically consist of only IP
> resource, I had to chose random private IP address for test/debugging
> purpose (192.168....)
>
> When I tried to start service it failed with message -
>
> clurgmgrd: [31853]: <debug> 192.168.25.135 is not configured
>
> I manually made this virtual IP available on host and then started
> service it worked -
>
> clurgmgrd: [31853]: <debug> 192.168.25.135 already configured
>
>
> My question is - Is it prerequisite for IP resource to be manually
> added before it can be protected via cluster?
>
> Thanks
> Parvez
>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 24 Dec 2010 06:00:01 +0000
> From: Rajagopal Swaminathan <raju.rajsand@xxxxxxxxx>
> To: linux clustering <linux-cluster@xxxxxxxxxx>
> Subject: Re: IP Resource behavior with Red Hat Cluster
> Message-ID:
> <AANLkTik08h5urUqPYZ6azUWW2YGnsPdBbnOa+Jk-0JBu@xxxxxxxxxxxxxx>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Greetings,
>
> On Fri, Dec 24, 2010 at 5:33 AM, Parvez Shaikh
> <parvez.h.shaikh@xxxxxxxxx> wrote:
>> Hi all,
>>
>> I manually made this virtual IP available on host and then started
>> service it worked -
>>
>
> Can you please elaborate? did you try to assign IP to the ethx devices
> and then ping?
>
>> clurgmgrd: [31853]: <debug> 192.168.25.135 already configured
>>
>>
>> My question is - Is it prerequisite for IP resource to be manually
>> added before it can be protected via cluster?
>>
>
> Every resource/service has to be added to the cluster.
>
> And they cannot be used by anything else.
>
> Regards,
>
> Rajagopal
>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 24 Dec 2010 14:11:53 +0530
> From: Parvez Shaikh <parvez.h.shaikh@xxxxxxxxx>
> To: linux clustering <linux-cluster@xxxxxxxxxx>
> Subject: Re: IP Resource behavior with Red Hat Cluster
> Message-ID:
> <AANLkTimTfMFE7MvrQRLMOhpfKBRS+EDSF4OGwBgJu9-W@xxxxxxxxxxxxxx>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hi Rajagopal,
>
> Thank you for your response
>
> I have created a cluster configuration by adding IP resource with
> value 192.168.25.153 (some value) and created a service which just has
> IP resource part of it. I have set all requisite configuration such
> two node, node names, failover,fencing etc.
>
> Upon trying to start then service(enable service),it failed -
>
> clurgmgrd: [31853]: <debug> 192.168.25.135 is not configured
>
> Then manually added this IP to host
>
> ifconfig eth0:1 192.168.25.135
>
> Then service could start but it gave message -
>
> clurgmgrd: [31853]: <debug> 192.168.25.135 already configured
>
> So do I have to add virtual interface manually (as above or any other
> method?) before I could start service with IP resource under it?
>
> Thanks
> Parvez
>
> On Fri, Dec 24, 2010 at 11:30 AM, Rajagopal Swaminathan
> <raju.rajsand@xxxxxxxxx> wrote:
>> Greetings,
>>
>> On Fri, Dec 24, 2010 at 5:33 AM, Parvez Shaikh
>> <parvez.h.shaikh@xxxxxxxxx> wrote:
>>> Hi all,
>>>
>>> I manually made this virtual IP available on host and then started
>>> service it worked -
>>>
>>
>> Can you please elaborate? did you try to assign IP to the ethx devices
>> and then ping?
>>
>>> clurgmgrd: [31853]: <debug> 192.168.25.135 already configured
>>>
>>>
>>> My question is - Is it prerequisite for IP resource to be manually
>>> added before it can be protected via cluster?
>>>
>>
>> Every resource/service has to be added to the cluster.
>>
>> And they cannot be used by anything else.
>>
>> Regards,
>>
>> Rajagopal
>>
>> --
>> Linux-cluster mailing list
>> Linux-cluster@xxxxxxxxxx
>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Fri, 24 Dec 2010 13:46:05 +0100
> From: Jakov Sosic <jakov.sosic@xxxxxxx>
> To: linux clustering <linux-cluster@xxxxxxxxxx>
> Subject: Re: IP Resource behavior with Red Hat Cluster
> Message-ID: <4D14960D.50706@xxxxxxx>
> Content-Type: text/plain; charset=ISO-8859-1
>
> On 12/24/2010 09:41 AM, Parvez Shaikh wrote:
>> Hi Rajagopal,
>>
>> Thank you for your response
>>
>> I have created a cluster configuration by adding IP resource with
>> value 192.168.25.153 (some value) and created a service which just has
>> IP resource part of it. I have set all requisite configuration such
>> two node, node names, failover,fencing etc.
>>
>> Upon trying to start then service(enable service),it failed -
>>
>> clurgmgrd: [31853]: <debug> 192.168.25.135 is not configured
>>
>> Then manually added this IP to host
>>
>> ifconfig eth0:1 192.168.25.135
>>
>> Then service could start but it gave message -
>>
>> clurgmgrd: [31853]: <debug> 192.168.25.135 already configured
>>
>> So do I have to add virtual interface manually (as above or any other
>> method?) before I could start service with IP resource under it?
>
> How is your network configured? For an IP address to work in a cluster,
> you have to have interfaces on both machines set up, which are in the
> same subnet. For example:
>
> node1 # ifconfig eth0 192.168.25.11 netmask 255.255.255.0
> node2 # ifconfig eth0 192.168.25.12 netmask 255.255.255.0
>
> Then and only then will cluster be able to bring up virtual ip address
> and bind it as secondary on this interface. You can then see it with:
>
> # ip addr show
>
>
> I guess you're trying to bring up IP address from network subnet that is
> not in any way set up on your host. And that is a prerequisite with
> classic IP resource.
>
>
>
>
> --
> Jakov Sosic
> www.srce.hr
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 24 Dec 2010 22:16:39 +0530
> From: Parvez Shaikh <parvez.h.shaikh@xxxxxxxxx>
> To: linux clustering <linux-cluster@xxxxxxxxxx>
> Subject: Re: IP Resource behavior with Red Hat Cluster
> Message-ID:
> <AANLkTinp=BFk0ssVkDieOvXVaQqeRfMDQgPbbessA-Qc@xxxxxxxxxxxxxx>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hi Jakov
>
> Thank you for your response. My two hosts have multiple network
> interfaces or ethernet cards. I understood from your email, that the
> IP corresponding to "cluster node name" for both hosts, should be in
> the same subnet before a cluster could bring virtual IP up. I will
> reconfirm if these are in same subnets.
>
> Gratefully yours,
> Parvez
>
> On Fri, Dec 24, 2010 at 6:16 PM, Jakov Sosic <jakov.sosic@xxxxxxx> wrote:
>> On 12/24/2010 09:41 AM, Parvez Shaikh wrote:
>>> Hi Rajagopal,
>>>
>>> Thank you for your response
>>>
>>> I have created a cluster configuration by adding IP resource with
>>> value 192.168.25.153 (some value) and created a service which just has
>>> IP resource part of it. I have set all requisite configuration such
>>> two node, node names, failover,fencing etc.
>>>
>>> Upon trying to start then service(enable service),it failed -
>>>
>>> clurgmgrd: [31853]: <debug> 192.168.25.135 is not configured
>>>
>>> Then manually added this IP to host
>>>
>>> ifconfig eth0:1 192.168.25.135
>>>
>>> Then service could start but it gave message -
>>>
>>> clurgmgrd: [31853]: <debug> 192.168.25.135 already configured
>>>
>>> So do I have to add virtual interface manually (as above or any other
>>> method?) before I could start service with IP resource under it?
>>
>> How is your network configured? For an IP address to work in a cluster,
>> you have to have interfaces on both machines set up, which are in the
>> same subnet. For example:
>>
>> node1 # ifconfig eth0 192.168.25.11 netmask 255.255.255.0
>> node2 # ifconfig eth0 192.168.25.12 netmask 255.255.255.0
>>
>> Then and only then will cluster be able to bring up virtual ip address
>> and bind it as secondary on this interface. You can then see it with:
>>
>> # ip addr show
>>
>>
>> I guess you're trying to bring up IP address from network subnet that is
>> not in any way set up on your host. And that is a prerequisite with
>> classic IP resource.
>>
>>
>>
>>
>> --
>> Jakov Sosic
>> www.srce.hr
>>
>> --
>> Linux-cluster mailing list
>> Linux-cluster@xxxxxxxxxx
>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>
>
>
>
> ------------------------------
>
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
> End of Linux-cluster Digest, Vol 80, Issue 23
> *********************************************
>
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
