to power-cycle (as can't even login to do reboot) the box & it came
up fine. No eventful messages found in /var/log/messages file
Thanks
U
On Fri, Oct 8, 2010 at 11:00 PM, Kit Gerrits <kitgerrits@xxxxxxxxx> wrote:
The error:SCSI0 (0:0) : rejecting I/O to offline devicemeans that one of the disks has failed.If the /var/ filesystem resides on this disk, the security logs become unwritable and the system refuses log-ins.The physical terminal is usually the most fail-safe way to log in (it has the most overrides.If this fails (as it appears to have done, you could try rebooting, to see if the disk will come back (it sometimes does).Otherwise, I fear you may need to swap out the disk and restore (or reinstall) what was on there.Regards,Kit
From: linux-cluster-bounces@xxxxxxxxxx [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of sunhux G
Sent: vrijdag 8 oktober 2010 19:31
To: linux clustering
Subject: Re: RHES4 box does not prompt for password afterentering login id at consolePressing Ctrl-Alt-Fx where x is one of the numbers,I got into another virtual console which showed the message:SCSI0 (0:0) : rejecting I/O to offline deviceIs the above message related to the login issue?I've just managed to login to another Linux box on the same subnet& tried "ssh -v a_userid@problem_Linux_box_address" & the remoteconnection was closed, screen display is as follows :[root@svrname ~]# ssh -v myuserid@xxxxxxxxxxOpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 2003debug1: Reading configuration data /etc/ssh/ssh_configdebug1: Applying options for *debug1: Connecting to 172.16.x.y [172.16.x.y] port 22.debug1: Connection established.debug1: permanently_set_uid: 0/0debug1: identity file /root/.ssh/id_rsa type -1debug1: identity file /root/.ssh/id_dsa type -1ssh_exchange_identification: Connection closed by remote hostping to the problem box is Ok
On Sat, Oct 9, 2010 at 12:36 AM, sunhux G <sunhux@xxxxxxxxx> wrote:
I have a Dell 1850 box running RHES4.6 with Tomcat 5.5.17and Opinion 5.2.9 : tonight the Dataprotector centralized backupfailed to backup via this server's NIC.After entering root at the login: prompt, the console screen clears& it's back with the login prompt again without prompting forpassword.I would not want to reboot this box if possible as it's production.Haven't tried ssh into it yet but anyway, I only recall there's rootlogin id in this box, there's no other login id & since it's a hardenedbox, I can't ssh into this box using root.any other idea?There's no alert from the monitoring tool (which usually we'll get ifthe filesystem or memory utilization or CPU exceeded the definedthresholds or ping fails to this box).TIAU
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.862 / Virus Database: 271.1.1/3183 - Release Date: 10/07/10 20:34:00
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster