i am trying to patch ricci . let see how it goes
but clusvcadm is failing as well
[root@http1 ~]# clusvcadm -e httpd1 -m http1.xxxx.local
Member http1.xxxx.local trying to enable service:httpd1...Invalid operation for resource
here, http1 , where i was trying to run the service from luci
what could be the problem ?
is there any way to find out if there is any problem with config ??
On 27 September 2010 16:26, Ben Turner <bturner@xxxxxxxxxx> wrote:
RHEL 5.6 hasn't been released yet so your package probably contains the problem. I'm not sure how in sync Centos is with RHEL or if they patch earlier so I cannot give you a time frame when it will be in Centos or if they have already patched it. The problem in that BZ is more of an annoyance, you usually just have to retry a time or two and it works. If you can't get Luci working properly with your service at all you should try enabling the service through the command line with clusvcadm -e. If it is not working from the command line either then there is a problem with the service config.
-Ben
----- "fosiul alam" <expertalert@xxxxxxxxx> wrote:
> Hi Ben
> Thanks
>
> I named this cluster as mysql-server but i have not installed mysql
> database in their yet
>
> and both luci and ricci on luci server and node1 is running this
> version
>
> luci-0.12.2-12.el5.centos.1
> ricci-0.12.2-12.el5.centos.1
>
>
> do you think this version has problem as well ??
>
> thanks for your help
>
>
>
>
> On 24 September 2010 15:33, Ben Turner < bturner@xxxxxxxxxx > wrote:
>
>
> There is an issue with ricci timeouts that was fixed recently:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=564490
>
> I'm not sure but you may be hitting that bug. Symptoms include: luci
> isn't able to get the status from the node, timeouts when querying
> ricci, etc. The fix should be released with 5.6
>
> On the mysql service there are some options that you need to set. Here
> are all the options available to that agent:
>
> mysql
> Defines a MySQL database server
>
> Attribute Description
> config_file Define configuration file
> listen_address Define an IP address for MySQL server. If the address
> is not given then first IP address from the service is taken.
> mysqld_options Other command-line options for mysqld
> name Name
> ref Reference to existing mysql resource in the resources section.
> service_name Inherit the service name.
> shutdown_wait Wait X seconds for correct end of service shutdown
> startup_wait Wait X seconds for correct end of service startup
> __enforce_timeouts Consider a timeout for operations as fatal.
> __failure_expire_time Amount of time before a failure is forgotten.
> __independent_subtree Treat this and all children as an independent
> subtree.
> __max_failures Maximum number of failures before returning a failure
> to a status check.
>
> If I recall correctly you may need to tweak:
>
> shutdown_wait Wait X seconds for correct end of service shutdown
> startup_wait Wait X seconds for correct end of service startup
>
> There can be problems relocating the DB if it takes too long to
> start/shutdown. If you are having problems relocating with luci it may
> be a good idea to test with:
>
> # clusvcadm -r <service name> -m <cluster node>
>
> -Ben
>
>
>
>
>
>
> ----- "fosiul alam" < expertalert@xxxxxxxxx > wrote:
>
> > Hi
> > I have 4 nodes cluster,
> > It was running fine. but today one nodes is giving trouble
> >
> > From luci Gui interface, when i try to relocate service into this
> node
> > and trying to relocate from this nodes to another nodes
> >
> > from luci gui interface, its showing :
> >
> > Unable to retrieve batch 1908047789 status from
> > beaver.domain.local:11111: clusvcadm start failed to start httpd1:
> > Starting cluster service "httpd1" on node "http1.domain.local" --
> You
> > will be redirected in 5 seconds.
> > also
> >
> > The ricci agent for this node is unresponsive. Node-specific
> > information is not available at this time. :
> >
> > but ricci is running on problematic node ,
> > ricci 7324 0.0 0.1 58876 2932 ? S<s 14:40 0:00 ricci -u 101
> >
> > there is not any firewall running.
> >
> > iptables -L
> > Chain INPUT (policy ACCEPT)
> > target prot opt source destination
> >
> > Chain FORWARD (policy ACCEPT)
> > target prot opt source destination
> >
> > Chain OUTPUT (policy ACCEPT)
> > target prot opt source destination
> >
> > Chain RH-Firewall-1-INPUT (0 references)
> > target prot opt source destination
> >
> > port 11111 is runningg
> >
> > netstat -an | grep 11111
> > tcp 0 0 0.0.0.0:11111 0.0.0.0:* LISTEN
> >
> >
> > but still ricci is very unstable , and i cant relocate any service
> on
> > this node or i cant relocate any service away from this node.
> >
> > from problematic node if i type this
> >
> > clustat
> > Cluster Status for ng1 @ Thu Sep 23 20:24:02 2010
> > Member Status: Quorate
> >
> > Member Name ID Status
> > ------ ---- ---- ------
> > beaver.xxx.local 1 Online, rgmanager ::: luci is running from this
> > server
> > publicdns1.xxxx.local 2 Online, rgmanager
> > http1.xxxx.local 3 Online, Local, rgmanager
> > mail01.xxxxx.local 4 Online, rgmanager
> >
> > Service Name Owner (Last) State
> > ------- ---- ----- ------ -----
> > service:httpd1 mail01.xxxx.local started
> > service:mysql-server http1.xxxx.local started -------------------
> this
> > is the problematic node
> > service:public-dns publicdns1.xxxxxx.local started
> >
> > I cant move that service mysql-server from this node or cant
> relocate
> > any service on this node ..
> > I am very confused.
> >
> > what shall i do to fix this issue ??
> >
> > thanks for your advise.
> >
> >
> >
> >
> > --
> > Linux-cluster mailing list
> > Linux-cluster@xxxxxxxxxx
> > https://www.redhat.com/mailman/listinfo/linux-cluster
>
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
>
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
