Does manually tuning glock trimming still apply to GFS2? I have seen references that have talked about increasing resource groups, and also resources saying that if increased to high it could hurt performance. From what I can figure out looks like the only way to change this is a reformat, is this correct? I am not opposed to doing this, as this cluster is not yet in production, although, reformating, and restoring all the content to the file system will take a pretty decent amount of time, so I don't really want to do it to many times. Would increasing the resource groups be a worth while thing to try, and if so, is there any good way to figure out (short of trial and error) what value I should use for the resource group allocation? I found this tread from a search using a search links I found in one of the threads you gave me a link to: http://www.mail-archive.com/linux-cluster@xxxxxxxxxx/msg00990.html On 7/23/2010 11:15 AM, Gordan Bobic wrote: > Sounds like you are suffering from extreme lock bouncing between the > nodes. This is a FAQ. I suggest you have a read through the mail > archives of this list for similar discussions, e.g.: > > http://www.mail-archive.com/linux-cluster@xxxxxxxxxx/msg04412.html > http://www.mail-archive.com/linux-cluster@xxxxxxxxxx/msg08177.html > > Gordan > > On Thu, 2010-07-22 at 11:55 -0400, Fred Wittekind wrote: >> Two web servers, both virtualized with CentOS Xen servers as host >> (residing on two different physical servers). >> GFS used to store home directories containing web document roots. >> >> Shared block device used by GFS is an ISCSI target with the ISCSI >> initiator residing on the Dom-0, and presented to Dom-U webservers as >> drives. >> Also, providing a second shared block device for quorum disk. >> >> If I hit the web site on just one of the nodes, it behaves as expected. >> If I try to load the websites from both nodes at the same time (two web >> browser instances), the load average on both nodes spikes, and page >> loads very slowly. The site I am trying to host is very high traffic, >> and if the servers can be nearly brought to there knees with two web >> browser instances running on a single workstation, that's not going to work. >> >> I am not seeing any error messages in the logs regarding the cluster. >> >> Any help or suggestions on how to troubleshoot this issue would be >> greatly appreciated. >> >> >> [root@www3 www]# find ./ | wc -l >> 64815 >> >> [root@www3 www]# gfs2_tool df /home/www >> /home/www: >> SB lock proto = "lock_dlm" >> SB lock table = "Web:homewww" >> SB ondisk format = 1801 >> SB multihost format = 1900 >> Block size = 4096 >> Journals = 2 >> Resource Groups = 316 >> Mounted lock proto = "lock_dlm" >> Mounted lock table = "Web:homewww" >> Mounted host data = "jid=1:id=393217:first=0" >> Journal number = 1 >> Lock module flags = 0 >> Local flocks = FALSE >> Local caching = FALSE >> >> Type Total Blocks Used Blocks Free Blocks use% >> ------------------------------------------------------------------------ >> data 20707148 4347237 16359911 21% >> inodes 16426386 66475 16359911 0% >> >> [root@www3 www]# gfs2_tool gettune /home/www >> new_files_directio = 0 >> new_files_jdata = 0 >> quota_scale = 1.0000 (1, 1) >> logd_secs = 1 >> recoverd_secs = 60 >> statfs_quantum = 30 >> stall_secs = 600 >> quota_cache_secs = 300 >> quota_simul_sync = 64 >> statfs_slow = 0 >> complain_secs = 10 >> max_readahead = 262144 >> quota_quantum = 60 >> quota_warn_period = 10 >> jindex_refresh_secs = 60 >> log_flush_secs = 60 >> incore_log_blocks = 1024 >> >> [root@www3 www]# cat /etc/cluster/cluster.conf |egrep '(dlm)|(gfs)' >> <dlm plock_ownership="1" plock_rate_limit="0"/> >> <gfs_controld plock_rate_limit="0"/> >> >> >> Fred Wittekind >> >> -- >> Linux-cluster mailing list >> Linux-cluster@xxxxxxxxxx >> https://www.redhat.com/mailman/listinfo/linux-cluster > > -- > Linux-cluster mailing list > Linux-cluster@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/linux-cluster > -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
