Hi folks, i'm testing a two node cluster (on redhat 5.4, hp dl380g3). I'm using fence_ilo, have a quorum disk (*cluster.conf) and have an IP resource and GFS2 mount point. Every think works well, until I completely disconnect the power from one node (ex. node1). Now node2 can't fence node1 (since there is no connection to the fence ilo device) and I can't start the cluster at all. When I try to reboot node2 it hangs on Starting fencing... I guess my question is: Is there a way to start the cluster if only one node is present? Thank you for any input. *cluster.conf <?xml version="1.0"?> <cluster alias="hpcluster" config_version="16" name="hpcluster"> <fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="3"/> <clusternodes> <clusternode name="node2.domain.com" nodeid="1" votes="1"> <fence> <method name="1"> <device name="node2-ilo"/> </method> </fence> </clusternode> <clusternode name="node1.domain.com" nodeid="2" votes="1"> <fence> <method name="1"> <device name="node1-ilo"/> </method> </fence> </clusternode> </clusternodes> <cman expected_votes="3" two_node="0"/> <fencedevices> <fencedevice agent="fence_ilo" hostname="node1-ilo" login="admin" name="node1-ilo" passwd="admin"/> <fencedevice agent="fence_ilo" hostname="node2-ilo" login="admin" name="node2-ilo" passwd="admin"/> </fencedevices> <rm> <failoverdomains/> <resources> <ip address="10.10.10.15" monitor_link="1"/> </resources> <service autostart="0" exclusive="0" name="myservice" recovery="relocate"> <ip ref="10.10.10.15"/> </service> </rm> <quorumd device="/dev/emcpowerb1" votes="1" status_file="/tmp/qdisk"> <heuristic program="ping 10.10.10.1 -c1 -t1" /> </quorumd> </cluster> -- Glisha -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
