|
Red Hat Linux-Clustering I am currently setting up a two node cluster for a
Database Environment… I have Network Bonding setup on the two nodes and
was reading in one document that Red Hat uses eth0 as the default heartbeat… Is there something I need to do to have it setup to
us a certain bond0.xxx VLan ?? and
if so how would I do this ?? bond0 Link
encap:Ethernet HWaddr
00:26:B9:34:46:0B
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:205491095 errors:0 dropped:0
overruns:0 frame:0 TX packets:213210619 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:95394558805 (88.8 GiB) TX bytes:173234191604 (161.3 GiB) bond0.211 Link encap:Ethernet HWaddr
00:26:B9:34:46:0B
inet addr:10.195.27.5 Bcast:10.195.27.31 Mask:255.255.255.224
inet6 addr: fe80::226:b9ff:fe34:460b/64
Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:200489472 errors:0 dropped:0 overruns:0
frame:0
TX packets:213200258 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:90408105703 (84.1 GiB) TX bytes:171522012810 (159.7 GiB) bond0.211:1 Link encap:Ethernet HWaddr 00:26:B9:34:46:0B
inet addr:10.195.27.16 Bcast:10.195.27.31 Mask:255.255.255.224
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 bond0.212 Link encap:Ethernet HWaddr
00:26:B9:34:46:0B
inet addr:135.108.71.5 Bcast:135.108.71.31 Mask:255.255.255.224
inet6 addr: fe80::226:b9ff:fe34:460b/64
Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:523160 errors:0 dropped:0 overruns:0
frame:0
TX packets:10850 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:79853140 (76.1 MiB) TX bytes:2559699 (2.4 MiB) bond0.212:1 Link encap:Ethernet HWaddr 00:26:B9:34:46:0B
inet addr:135.108.71.16 Bcast:135.108.71.31 Mask:255.255.255.224
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 bond0.213 Link encap:Ethernet HWaddr
00:26:B9:34:46:0B
inet addr:192.168.65.5 Bcast:192.168.65.31 Mask:255.255.255.224
inet6 addr: fe80::226:b9ff:fe34:460b/64
Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:367458 errors:0 dropped:0 overruns:0
frame:0
TX packets:938 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:63975254 (61.0 MiB) TX bytes:39788 (38.8 KiB) bond0.213:1 Link encap:Ethernet HWaddr 00:26:B9:34:46:0B
inet addr:192.168.65.16 Bcast:192.168.65.31 Mask:255.255.255.224
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 bond0.215 Link encap:Ethernet HWaddr
00:26:B9:34:46:0B
inet addr:192.168.15.5 Bcast:192.168.15.255 Mask:255.255.255.0
inet6 addr: fe80::226:b9ff:fe34:460b/64
Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:39936 errors:0 dropped:0 overruns:0
frame:0
TX packets:17 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:7984970 (7.6 MiB) TX bytes:1106 (1.0 KiB) eth0 Link
encap:Ethernet HWaddr
00:26:B9:34:46:0B
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:106617306 errors:0 dropped:0
overruns:0 frame:0
TX packets:106605309 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:49644091276 (46.2 GiB) TX bytes:86616008153 (80.6 GiB)
Interrupt:225 Memory:d6000000-d6012100 eth1 Link
encap:Ethernet HWaddr
00:26:B9:34:46:0B
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:98873789 errors:0 dropped:0
overruns:0 frame:0
TX packets:106605310 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:45750467529 (42.6 GiB) TX bytes:86618183451 (80.6 GiB)
Interrupt:233 Memory:d8000000-d8012100 lo Link
encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:63014709 errors:0 dropped:0
overruns:0 frame:0
TX packets:63014709 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4440888070 (4.1 GiB) TX bytes:4440888070 (4.1 GiB) # cat /etc/cluster/cluster.conf <?xml version="1.0"?> <cluster alias="echpdb"
config_version="46" name="echpdb">
<fence_daemon clean_start="0" post_fail_delay="0"
post_join_delay="3"/> <clusternodes>
<clusternode name="echpdb2.dcd.convergys.com"
nodeid="1" votes="1">
<fence>
<method name="1">
<device
name="echpdb2-drac"/>
</method>
</fence>
</clusternode>
<clusternode name="echpdb1.dcd.convergys.com"
nodeid="2" votes="1">
<fence>
<method name="1">
<device
name="echpdb1-drac"/>
</method>
</fence>
</clusternode>
</clusternodes>
<cman expected_votes="1" two_node="1"/> <fencedevices>
<fencedevice agent="fence_drac" ipaddr="10.195.27.70"
login="root" name="echpdb1-drac"
passwd="calvin"/>
<fencedevice agent="fence_drac"
ipaddr="10.195.27.71" login="root"
name="echpdb2-drac" passwd="calvin"/>
</fencedevices> <rm>
<failoverdomains>
<failoverdomain
name="echpdb" nofailback="1" ordered="1"
restricted="1">
<failoverdomainnode name="echpdb2.dcd.convergys.com"
priority="2"/>
<failoverdomainnode name="echpdb1.dcd.convergys.com"
priority="1"/>
</failoverdomain>
</failoverdomains>
<resources>
<script file="/etc/cluster/echpdb/echpdb.ksh"
name="ECHP"/>
</resources>
<service autostart="0" domain="echpdb"
exclusive="0" name="echpdb"
recovery="relocate">
<script ref="ECHP"/>
</service>
</rm> </cluster> # Thanks Mike |
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
