I`m tring to upgrade my old 1.04 installation to 2.03.11.
I`m installed new versions of software.
I`m using customised kernel.
And cluster is came up.
Creating test filesystem is ok.
But when i trying to mount new filesystem error is occured.
Can anybody tell what i`m doing wrong?
Thank you!
mount -t gfs -v /dev/sdb1 /mnt
node3:/usr/src# mount -t gfs -v /dev/sdb1 /mnt
/sbin/mount.gfs: mount /dev/sdb1 /mnt
/sbin/mount.gfs: parse_opts: opts = "rw"
/sbin/mount.gfs: clear flag 1 for "rw", flags = 0
/sbin/mount.gfs: parse_opts: flags = 0
/sbin/mount.gfs: parse_opts: extra = ""
/sbin/mount.gfs: parse_opts: hostdata = ""
/sbin/mount.gfs: parse_opts: lockproto = ""
/sbin/mount.gfs: parse_opts: locktable = ""
/sbin/mount.gfs: message to gfs_controld: asking to join mountgroup:
/sbin/mount.gfs: write "join /mnt gfs lock_dlm TEST:NEW rw /dev/sdb1"
/sbin/mount.gfs: message from gfs_controld: response to join request:
/sbin/mount.gfs: lock_dlm_join: read "0"
/sbin/mount.gfs: message from gfs_controld: mount options:
/sbin/mount.gfs: lock_dlm_join: read "hostdata=jid=0:id=1441795:first=1"
/sbin/mount.gfs: lock_dlm_join: hostdata: "hostdata=jid=0:id=1441795:first=1"
/sbin/mount.gfs: lock_dlm_join: extra_plus: "hostdata=jid=0:id=1441795:first=1"
/sbin/mount.gfs: mount(2) failed error -1 errno 19
/sbin/mount.gfs: lock_dlm_mount_result: write "mount_result /mnt gfs -1"
/sbin/mount.gfs: message to gfs_controld: asking to leave mountgroup:
/sbin/mount.gfs: lock_dlm_leave: write "leave /mnt gfs 19"
/sbin/mount.gfs: message from gfs_controld: response to leave request:
/sbin/mount.gfs: lock_dlm_leave: read "0"
/sbin/mount.gfs: error mounting /dev/sdb1 on /mnt: No such device
# uname -a
Linux node3.cl.nodex.ru 2.6.30.9 #1 SMP Thu Nov 26 12:18:02 MSK 2009 i686 GNU/Linux
node3:/usr/src# cman_tool status
Version: 6.2.0
Config Version: 1
Cluster Name: TEST
Cluster Id: 1198
Cluster Member: Yes
Cluster Generation: 28
Membership state: Cluster-Member
Nodes: 1
Expected votes: 1
Total votes: 1
Node votes: 1
Quorum: 1
Active subsystems: 8
Flags: 2node Dirty
Ports Bound: 0 11
Node name: node3
Node ID: 3
Multicast addresses: 239.0.210.1
Node addresses: 10.210.10.12
node3:/usr/src#
node3:/usr/src# mkfs -t gfs -p lock_dlm -t TEST:NEW -j 1 /dev/sdb1
This will destroy any data on /dev/sdb1.
It appears to contain a LVM2_member raid.
Are you sure you want to proceed? [y/n] y
Device: /dev/sdb1
Blocksize: 4096
Filesystem Size: 24382128
Journals: 1
Resource Groups: 374
Locking Protocol: lock_dlm
Lock Table: TEST:NEW
Syncing...
All Done
node3:/usr/src# cat /etc/cluster/cluster.conf
<?xml version="1.0"?>
<cluster name="TEST" config_version="1">
<cman two_node="1" expected_votes="1" deadnode_timer="1">
<multicast addr="239.0.210.1"/>
</cman>
<clusternodes>
<clusternode name="node3" votes="1" nodeid="3">
<multicast addr="239.0.210.1" interface="eth0"/>
<fence>
<method name="single">
<device name="pdu2" port="6"/>
</method>
</fence>
</clusternode>
<clusternode name="node4" votes="1" nodeid="4">
<multicast addr="239.0.210.1" interface="eth0"/>
<fence>
<method name="single">
<device name="pdu2" port="5"/>
</method>
</fence>
</clusternode>
</clusternodes>
<fence_daemon post_fail_delay="0" post_join_delay="3"/>
<fencedevices>
<fencedevice name="pdu2" agent="fence_apc" ipaddr="pdu2" login="cluster" passwd="xxxxxx"/>
</fencedevices>
</cluster>
--
Pavel D. Kuzin
pk@xxxxxxxx
Nodex LTD.
Saint-Petersburg, Russia
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
