RHCS not fence 2nd node in 2 nodes cluster

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Gurus,

I am working on setup 2 nodes cluster, and environment is,

Hardware,
   IBM BladeCenter with 2 LS42( AMD Opteron Quad Code 2356 CPU, 16GB
Memory).
   Storage, EMC CX3-20f
   Storage Switch: Brocade 4GB 20 ports switch in IBM bladecenter.
   Network Switch: Cisco Switch module in IBM Bladecenter.
Software,
   Redhat EL 5.3 x86_64, 2.6.18-128.el5
   Redhat Cluster Suite 5.3.

This is 2 nodes cluster, and my problem is that,
  - When poweroff 1st node with command "halt -fp", 2nd node can fence
1st node and take over services.
  - When poweroff 2nd node with command "halt -fp", 1st node can't fence
2nd node and can't take over services.


fence_tool dump contents,
----for successful test
dump read: Success
1257305495 our_nodeid 2 our_name 198.18.9.34
1257305495 listen 4 member 5 groupd 7
1257305511 client 3: join default
1257305511 delay post_join 3s post_fail 0s
1257305511 clean start, skipping initial nodes
1257305511 setid default 65538
1257305511 start default 1 members 1 2 
1257305511 do_recovery stop 0 start 1 finish 0
1257305511 first complete list empty warning
1257305511 finish default 1
1257305611 stop default
1257305611 start default 3 members 2 
1257305611 do_recovery stop 1 start 3 finish 1
1257305611 add node 1 to list 1
1257305611 node "198.18.9.33" not a cman member, cn 1
1257305611 node "198.18.9.33" has not been fenced
1257305611 fencing node 198.18.9.33
1257305615 finish default 3
1257305658 client 3: dump
----For failed test
dump read: Success
1257300282 our_nodeid 1 our_name 198.18.9.33
1257300282 listen 4 member 5 groupd 7
1257300297 client 3: join default
1257300297 delay post_join 3s post_fail 0s
1257300297 clean start, skipping initial nodes
1257300297 setid default 65538
1257300297 start default 1 members 1 2 
1257300297 do_recovery stop 0 start 1 finish 0
1257300297 first complete list empty warning
1257300297 finish default 1
1257303721 stop default
1257303721 start default 3 members 1 
1257303721 do_recovery stop 1 start 3 finish 1
1257303721 add node 2 to list 1
1257303721 averting fence of node 198.18.9.34
1257303721 finish default 3
1257303759 client 3: dump

I think it was caused by "averting fence of node 198.18.9.34", but why
it advert fence? Could you help me out? Thanks in advance.

This cluster.conf for reference.
<?xml version="1.0"?>
<cluster config_version="14" name="x">
<fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="3"/>
<clusternodes>
        <clusternode name="198.18.9.33" nodeid="1" votes="1">
                <fence>
                        <method name="1">
                                <device blade="13" name="mm1"/>
                        </method>
                </fence>
        </clusternode>
        <clusternode name="198.18.9.34" nodeid="2" votes="1">
                <fence>
                        <method name="1">
                                <device blade="14" name="mm1"/>
                        </method>
                </fence>
        </clusternode>
</clusternodes>

<quorumd device="/dev/sdb1" interval="2" tko="7" votes="1">
        <heuristic interval="3" program="ping 198.18.9.61 -c1 -t2"
score="10"/>
</quorumd>

<totem token="27000"/>
<cman expected_votes="3" two_node="0" quorum_dev_poll="23000">
        <multicast addr="239.192.148.6"/>
</cman>


<fencedevices>
        <fencedevice agent="fence_bladecenter_ssh" ipaddr="x" login="x"
name="mm1" passwd="x"/>
</fencedevices>



BRs,
Colin

--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster

[Index of Archives]     [Corosync Cluster Engine]     [GFS]     [Linux Virtualization]     [Centos Virtualization]     [Centos]     [Linux RAID]     [Fedora Users]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite Camping]

  Powered by Linux