Hi, I am using RHCS 5.2 for achieving High Availability in MySQL database service. I have configured two nodes; one as a primary and the other as a backup. Both the servers have GFS on SAN. The cluster suite is configured properly and when a node shuts down, the service is being started in the other node with the configured virtual ip address for MySQL service. However, if we plug out the network link to the primary server the service is not being started in the other node; even after having 'monitor_link="1"' in cluster.conf for that virtual ip address. Our servers are connected by redundant SAN connections so we have 6 network interfaces on both the servers. I feel the nodes are still able to communicate through these network connections which are being used for SAN volumes. Is there anyway in which I can configure cluster manager to bind the virtual ip for MySQL service to an interface and monitor the link on that interface? Regards, Sree Harsha Totakura =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
