Hi!
I have pasted the modified version of fence script for Dell iDRAC6.
Thanks,
Nitin
#!/usr/bin/perl
# The following agent has been tested on:
#
# Model DRAC Version Firmware
# ------------------- -------------- ----------------------
# PowerEdge 750 DRAC III/XT 3.20 (Build 10.25)
# Dell Remote Access Controller - ERA and DRAC III/XT, v.3.20, A00 #
# PowerEdge 1855 DRAC/MC 1.1 (Build 03.03)
# PowerEdge 1855 DRAC/MC 1.2 (Build 03.03)
# PowerEdge 1855 DRAC/MC 1.3 (Build 06.12)
# PowerEdge 1850 DRAC 4/I 1.35 (Build 09.27)
# PowerEdge 1850 DRAC 4/I 1.40 (Build 08.24)
# PowerEdge 1950 DRAC 5 1.0 (Build 06.05.12)
#
use Getopt::Std;
use Net::Telnet ();
# Get the program name from $0 and strip directory names $_=$0; s/.*\///; my $pname = $_;
my $telnet_timeout = 10; # Seconds to wait for matching telent response
my $power_timeout = 20; # time to wait in seconds for power state changes
$action = 'reboot'; # Default fence action.
my $logged_in = 0;
my $quiet = 0;
my $t = new Net::Telnet;
my $DRAC_VERSION_UNKNOWN = '__unknown__';
my $DRAC_VERSION_III_XT = 'DRAC III/XT';
my $DRAC_VERSION_MC = 'DRAC/MC';
my $DRAC_VERSION_4I = 'DRAC 4/I';
my $DRAC_VERSION_4P = 'DRAC 4/P';
my $DRAC_VERSION_5 = 'DRAC 5';
my $DRAC_VERSION_6 = 'DRAC 6';
my $PWR_CMD_SUCCESS = "/^OK/";
my $PWR_CMD_SUCCESS_DRAC5 = "/^Server power operation successful$/";
# WARNING!! Do not add code bewteen "#BEGIN_VERSION_GENERATION" and # "#END_VERSION_GENERATION" It is generated by the Makefile
#BEGIN_VERSION_GENERATION
$FENCE_RELEASE_NAME="2.0.115";
$REDHAT_COPYRIGHT=("Copyright (C) Red Hat, Inc. 2004 All rights reserved."); $BUILD_DATE="(built Wed Sep 2 11:45:31 EDT 2009)"; #END_VERSION_GENERATION
sub usage
{
print "Usage:\n";
print "\n";
print "$pname [options]\n";
print "\n";
print "Options:\n";
print " -a <ip> IP address or hostname of DRAC\n";
print " -c <cmd_prompt> force DRAC command prompt\n";
print " -d <dracversion> force DRAC version to use\n";
print " -D <debugfile> debugging output file\n";
print " -h usage\n";
print " -l <name> Login name\n";
print " -m <modulename> DRAC/MC module name\n";
print " -o <string> Action: reboot (default), off or on\n";
print " -p <string> Login password\n";
print " -S <path> Script to run to retrieve password\n";
print " -q quiet mode\n";
print " -V version\n";
print "\n";
print "CCS Options:\n";
print " action = \"string\" Action: reboot (default), off or on\n";
print " debug = \"debugfile\" debugging output file\n";
print " ipaddr = \"ip\" IP address or hostname of DRAC\n";
print " login = \"name\" Login name\n";
print " passwd = \"string\" Login password\n";
print " passwd_script = \"path\" Script to run to retrieve password\n";
exit 0;
}
sub msg
{
($msg)=@_;
print $msg."\n" unless $quiet;
}
sub fail
{
($msg)=@_;
print $msg."\n" unless $quiet;
if (defined $t)
{
# make sure we don't get stuck in a loop due to errors
$t->errmode('return');
logout() if $logged_in;
$t->close
}
exit 1;
}
sub fail_usage
{
($msg)=@_;
print STDERR $msg."\n" if $msg;
print STDERR "Please use '-h' for usage.\n";
exit 1;
}
sub version
{
print "$pname $FENCE_RELEASE_NAME $BUILD_DATE\n";
print "$REDHAT_COPYRIGHT\n" if ( $REDHAT_COPYRIGHT );
exit 0;
}
sub login
{
$t->open($address) or
fail "failed: telnet open failed: ". $t->errmsg."\n";
# Expect 'Login: '
($_) = $t->waitfor(Match => "/[Ll]ogin: /", Timeout=>15) or
fail "failed: telnet failed: ". $t->errmsg."\n" ;
# Determine DRAC version
if (/Dell Embedded Remote Access Controller \(ERA\)\nFirmware Version/m)
{
$drac_version = $DRAC_VERSION_III_XT;
} else {
if (/.*\((DRAC[^)]*)\)/m)
{
print "detected drac version '$1'\n" if $verbose;
$drac_version = $1 unless defined $drac_version;
print "WARNING: detected drac version '$1' but using "
. "user defined version '$drac_version'\n"
if ($drac_version ne $1);
}
else
{
$drac_version = $DRAC_VERSION_UNKNOWN;
}
}
# Setup prompt
if ($drac_version =~ /$DRAC_VERSION_III_XT/)
{
$cmd_prompt = "/\\[$login\\]# /"
unless defined $cmd_prompt;
}
elsif ($drac_version =~ /$DRAC_VERSION_MC/)
{
$cmd_prompt = "/DRAC\\/MC:/"
unless defined $cmd_prompt;
}
elsif ($drac_version =~ /$DRAC_VERSION_4I/)
{
$cmd_prompt = "/\\[$login\\]# /"
unless defined $cmd_prompt;
}
elsif ($drac_version =~ /$DRAC_VERSION_4P/)
{
$cmd_prompt = "/\\[$login\\]# /"
unless defined $cmd_prompt;
}
else
{
$drac_version = $DRAC_VERSION_UNKNOWN;
}
# Take a guess as to what the prompt might be if not already defined
$cmd_prompt="/(\\[$login\\]# |DRAC\\/MC:|\\\$ )/" unless defined $cmd_prompt;
# Send login
$t->print($login);
# Expect 'Password: '
$t->waitfor("/Password: /") or
fail "failed: timeout waiting for password";
# Send password
$t->print($passwd);
# DRAC5 prints version controller version info
# only after you've logged in.
if ($drac_version eq $DRAC_VERSION_UNKNOWN) {
if ($t->waitfor(Match => "/.*\($DRAC_VERSION_5\)/m")) {
$drac_version = $DRAC_VERSION_5;
$cmd_prompt = "/\\\$ /";
$PWR_CMD_SUCCESS = $PWR_CMD_SUCCESS_DRAC5;
} elsif ($t->waitfor(Match => "/.*\(admin\)/m")) {
$drac_version = $DRAC_VERSION_5;
$cmd_prompt = '/> $/';
$PWR_CMD_SUCCESS = $PWR_CMD_SUCCESS_DRAC5;
} else {
print "WARNING: unable to detect DRAC version '$_'\n";
}
}
$t->waitfor($cmd_prompt) or
fail "failed: invalid username or password";
if ($drac_version eq $DRAC_VERSION_UNKNOWN) {
print "WARNING: unsupported DRAC version '$drac_version'\n";
}
$logged_in = 1;
}
#
# Set the power status of the node
#
sub set_power_status
{
my ($state,$dummy) = @_;
my $cmd,$svr_action;
if ( $state =~ /^on$/) { $svr_action = "powerup" }
elsif( $state =~ /^off$/) { $svr_action = "powerdown" }
if ($drac_version eq $DRAC_VERSION_MC)
{
$cmd = "serveraction -m $modulename -d 0 $svr_action";
}
elsif ($drac_version eq $DRAC_VERSION_5) {
$cmd = "racadm serveraction $svr_action";
} else
{
$cmd = "serveraction -d 0 $svr_action";
}
$t->print($cmd);
# Expect /$cmd_prompt/
($_) = $t->waitfor($cmd_prompt) or
fail "failed: unexpected serveraction response";
my @cmd_out = split /\n/;
# discard command sent to DRAC
$_ = shift @cmd_out;
s/\e\[(([0-9]+;)*[0-9]+)*[ABCDfHJKmsu]//g; #strip ansi chars
s/^.*\x0D//;
fail "failed: unkown dialog exception: '$_'" unless (/^$cmd$/);
# Additional lines of output probably means an error.
# Aborting to be safe. Note: additional user debugging will be
# necessary, run with -D and -v flags
my $err;
while (@cmd_out)
{
$_ = shift @cmd_out;
#firmware vers 1.2 on DRAC/MC sends ansi chars - evil
s/\e\[(([0-9]+;)*[0-9]+)*[ABCDfHJKmsu]//g;
s/^.*\x0D//;
next if (/^\s*$/); # skip empty lines
if (defined $err)
{
$err = $err."\n$_";
}
else
{
next if ($PWR_CMD_SUCCESS);
$err = $_;
}
}
fail "failed: unexpected response: '$err'" if defined $err; }
#
# get the power status of the node and return it in $status and $_ # sub get_power_status {
my $status;
my $modname = $modulename;
my $cmd;
if ($drac_version eq $DRAC_VERSION_5) {
$cmd = "racadm serveraction powerstatus";
} else {
$cmd = "getmodinfo";
}
$t->print($cmd);
($_) = $t->waitfor($cmd_prompt);
my $found_header = 0;
my $found_module = 0;
my @cmd_out = split /\n/;
# discard command sent to DRAC
$_ = shift @cmd_out;
#strip ansi control chars
s/\e\[(([0-9]+;)*[0-9]+)*[ABCDfHJKmsu]//g;
s/^.*\x0D//;
fail "failed: unkown dialog exception: '$_'" unless (/^$cmd$/);
if ($drac_version ne $DRAC_VERSION_5) {
#Expect:
# #<group> <module> <presence> <pwrState> <health> <svcTag>
# 1 ----> chassis Present ON Normal CQXYV61
#
# Note: DRAC/MC has many entries in the table whereas DRAC III has only
# a single table entry.
while (1)
{
$_ = shift @cmd_out;
if (/^#<group>\s*<module>\s*<presence>\s*<pwrState>\s*<health>\s*<svcTag>/)
{
$found_header = 1;
last;
}
}
fail "failed: invalid 'getmodinfo' header: '$_'" unless $found_header;
}
foreach (@cmd_out)
{
s/^\s+//g; #strip leading space
s/\s+$//g; #strip training space
if ($drac_version eq $DRAC_VERSION_5) {
if(m/^Server power status: (\w+)/) {
$status = lc($1);
}
} else {
my ($group,$arrow,$module,$presence,$pwrstate,$health,
$svctag,$junk) = split /\s+/;
if ($drac_version eq $DRAC_VERSION_III_XT || $drac_version eq $DRAC_VERSION_4I || $drac_version eq $DRAC_VERSION_4P)
{
fail "failed: extraneous output detected from 'getmodinfo'" if $found_module;
$found_module = 1;
$modname = $module;
}
if ($modname eq $module)
{
fail "failed: duplicate module names detected" if $status;
$found_module = 1;
fail "failed: module not reported present" unless ($presence =~ /Present/);
$status = $pwrstate;
}
}
}
if ($drac_version eq $DRAC_VERSION_MC)
{
fail "failed: module '$modulename' not detected" unless $found_module;
}
$_=$status;
if(/^(on|off)$/i)
{
# valid power states
}
elsif ($status)
{
fail "failed: unknown power state '$status'";
}
else
{
fail "failed: unable to determine power state";
}
}
# Wait upto $power_timeout seconds for node power state to change to # $state before erroring out.
#
# return 1 on success
# return 0 on failure
#
sub wait_power_status
{
my ($state,$dummy) = @_;
my $status;
$state = lc $state;
for (my $i=0; $i<$power_timeout ; $i++)
{
get_power_status;
$status = $_;
my $check = lc $status;
if ($state eq $check ) { return 1 }
sleep 1;
}
$_ = "timed out waiting to power $state";
return 0;
}
#
# logout of the telnet session
#
sub logout
{
$t->print("");
$t->print("exit");
}
#
# error routine for Net::Telnet instance # sub telnet_error {
fail "failed: telnet returned: ".$t->errmsg."\n"; }
#
# execute the action. Valid actions are 'on' 'off' 'reboot' and 'status'.
# TODO: add 'configure' that uses racadm rpm to enable telnet on the drac # sub do_action {
get_power_status;
my $status = $_;
if ($action =~ /^on$/i)
{
if ($status =~ /^on$/i)
{
msg "success: already on";
return;
}
set_power_status on;
fail "failed: $_" unless wait_power_status on;
msg "success: powered on";
}
elsif ($action =~ /^off$/i)
{
if ($status =~ /^off$/i)
{
msg "success: already off";
return;
}
set_power_status off;
fail "failed: $_" unless wait_power_status off;
msg "success: powered off";
}
elsif ($action =~ /^reboot$/i)
{
if ( !($status =~ /^off$/i) )
{
set_power_status off;
}
fail "failed: $_" unless wait_power_status off;
set_power_status on;
fail "failed: $_" unless wait_power_status on;
msg "success: rebooted";
}
elsif ($action =~ /^status$/i)
{
msg "status: $status";
return;
}
else
{
fail "failed: unrecognised action: '$action'";
}
}
#
# Decipher STDIN parameters
#
sub get_options_stdin
{
my $opt;
my $line = 0;
while( defined($in = <>) )
{
$_ = $in;
chomp;
# strip leading and trailing whitespace
s/^\s*//;
s/\s*$//;
# skip comments
next if /^#/;
$line+=1;
$opt=$_;
next unless $opt;
($name,$val)=split /\s*=\s*/, $opt;
if ( $name eq "" )
{
print STDERR "parse error: illegal name in option $line\n";
exit 2;
}
# DO NOTHING -- this field is used by fenced
elsif ($name eq "agent" )
{
}
elsif ($name eq "ipaddr" )
{
$address = $val;
}
elsif ($name eq "login" )
{
$login = $val;
}
elsif ($name eq "action" )
{
$action = $val;
}
elsif ($name eq "passwd" )
{
$passwd = $val;
}
elsif ($name eq "passwd_script" )
{
$passwd_script = $val;
}
elsif ($name eq "debug" )
{
$debug = $val;
}
elsif ($name eq "modulename" )
{
$modulename = $val;
}
elsif ($name eq "drac_version" )
{
$drac_version = $val;
}
elsif ($name eq "cmd_prompt" )
{
$cmd_prompt = $val;
}
# Excess name/vals will fail
else
{
fail "parse error: unknown option \"$opt\"";
}
}
}
### MAIN #######################################################
#
# Check parameters
#
if (@ARGV > 0) {
getopts("a:c:d:D:hl:m:o:p:S:qVv") || fail_usage ;
usage if defined $opt_h;
version if defined $opt_V;
$quiet = 1 if defined $opt_q;
$debug = $opt_D;
fail_usage "Unknown parameter." if (@ARGV > 0);
fail_usage "No '-a' flag specified." unless defined $opt_a;
$address = $opt_a;
fail_usage "No '-l' flag specified." unless defined $opt_l;
$login = $opt_l;
$modulename = $opt_m if defined $opt_m;
if (defined $opt_S) {
$pwd_script_out = `$opt_S`;
chomp($pwd_script_out);
if ($pwd_script_out) {
$opt_p = $pwd_script_out;
}
}
fail_usage "No '-p' or '-S' flag specified." unless defined $opt_p;
$passwd = $opt_p;
$verbose = $opt_v if defined $opt_v;
$cmd_prompt = $opt_c if defined $opt_c;
$drac_version = $opt_d if defined $opt_d;
if ($opt_o)
{
fail_usage "Unrecognised action '$opt_o' for '-o' flag"
unless $opt_o =~ /^(Off|On|Reboot|status)$/i;
$action = $opt_o;
}
} else {
get_options_stdin();
fail "failed: no IP address" unless defined $address;
fail "failed: no login name" unless defined $login;
if (defined $passwd_script) {
$pwd_script_out = `$passwd_script`;
chomp($pwd_script_out);
if ($pwd_script_out) {
$passwd = $pwd_script_out;
}
}
fail "failed: no password" unless defined $passwd;
fail "failed: unrecognised action: $action"
unless $action =~ /^(Off|On|Reboot|status)$/i; }
$t->timeout($telnet_timeout);
$t->input_log($debug) if $debug;
$t->errmode('return');
login;
# Abort on failure beyond here
$t->errmode(\&telnet_error);
if ($drac_version eq $DRAC_VERSION_III_XT) {
fail "failed: option 'modulename' not compatilble with DRAC version '$drac_version'"
if defined $modulename;
}
elsif ($drac_version eq $DRAC_VERSION_MC) {
fail "failed: option 'modulename' required for DRAC version '$drac_version'"
unless defined $modulename;
}
do_action;
logout;
exit 0;
-----Original Message-----
From: linux-cluster-bounces@xxxxxxxxxx [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Andrew A. Neuschwander
Sent: Wednesday, September 30, 2009 3:48 PM
To: linux clustering
Subject: Re: Dell iDRAC 6 Support for fencing device
Could you post your modified fence_drac for iDRAC 6?
Thanks,
-A
--
Andrew A. Neuschwander, RHCE
Systems/Software Engineer
College of Forestry and Conservation
The University of Montana
http://www.ntsg.umt.edu
andrew@xxxxxxxxxxxx - 406.243.6310
Nitin Choudhary wrote:
> Hi!
>
> With small modification to fence_drac script it is working now.
>
> Thanks,
>
> Nitin
>
>
> -----Original Message-----
> From: linux-cluster-bounces@xxxxxxxxxx [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Louis
> Sent: Tuesday, September 29, 2009 6:16 PM
> To: linux clustering
> Subject: Re: Dell iDRAC 6 Support for fencing device
>
> Hi,
>
> I used ipmilan to bypass the iDREC6 fencing.
>
> <fencedevice agent="fence_ipmilan" ipaddr="10.10.10.10" login="xxxxx"
> name="xxxxx" passwd="yyyy">
>
>
> Regards
> Louis
> ----- Original Message -----
> From: "Nitin Choudhary" <Nitin.Choudhary@xxxxxxxx>
> To: "linux clustering" <linux-cluster@xxxxxxxxxx>
> Sent: Tuesday, September 29, 2009 1:18 PM
> Subject: Dell iDRAC 6 Support for fencing device
>
>
>> Hi!
>>
>> It seems that iDREC6 is not supported as fencing devices.
>>
>> Has anyone setup this before. Is there any workaround for this.
>>
>> Thanks,
>>
>> Nitin
>>
>> --
>> Linux-cluster mailing list
>> Linux-cluster@xxxxxxxxxx
>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>
>>
>
>
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
