RE: Hardware recommendation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Good point—the requisite CPU technology has been available for at least 3 years, so I tend to assume most users are running 64-bit processors with VT by now.  However, I suppose it's possible there are many older systems still in production.

 

We happen to use several 1950-class machines which have been repurposed for this.  They work very well with Xen hypervisors.  The 1950 can be inexpensively upgraded to 16GB RAM, and have two sockets which can accommodate 8 cores.  With shared storage, the 1U chassis gives very good density where space is a premium.  If 1950's are available, they can be a bargain for virtualization.

 

And, as you say, VT is required for some deployments.  Though I'd like to think most non-VT capable hardware will be long gone by the time RHEL5 reaches EOL.

 

Power consumption should be a consideration too.  It might be worth retiring some systems to save on power alone.  I don't have good numbers handy comparing power consumption vs. performance of different processor generations—perhaps someone else does.

 

From: linux-cluster-bounces@xxxxxxxxxx [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Doug Bunger
Sent: Saturday, July 25, 2009 12:39 PM
To: linux clustering
Subject: RE: Hardware recommendation

 

If you remission in house systems or (gag) get used systems, than CPU ***IS*** important.  You need to make sure you are running x86_64 with CPU virtualization technology (VT) extensions.  You'll need x86_64 to get past the i386 Xen 32meg memory limit, and you'll need VT to provide an update path to RHEL6, vSphere, or even Micro$oft Hyper-V.

Many of my customers are running older equipment and are not wanting to upgrade.  We are finding that in an HP shop, anything older than DL380 G5 won't cut it.  On the Dell side it seems the 1950 is the break point.

--- On Fri, 7/24/09, Jeff Sturm <jeff.sturm@xxxxxxxxxx> wrote:


From: Jeff Sturm <jeff.sturm@xxxxxxxxxx>
Subject: RE: Hardware recommendation
To: "linux clustering" <linux-cluster@xxxxxxxxxx>
Date: Friday, July 24, 2009, 6:21 PM

Don't go small.  If you're running 30-60 virtual machines you'll likely
need systems with at least 8 cores at 32GB of RAM, or more depending on
the needs of your virtual hosts.  There's really no way to guess at how
much RAM you'll need without understanding the needs of your virtual
hosts, however.

Dell PowerEdge hardware should work well for this.  We have some old
6950 systems we are now using for Xen.  These appear to have been
replaced by the R905 series, according to Dell's web site.

CPU isn't important.  All modern Intel (Core) and AMD processors work
well with Xen.  To save money I tend to opt for more cores at slower
speeds rather than buy the fastest speed processors available.

What are you using for storage?  If you want node failover you'll likely
want some sort of SAN for central storage.

I also recommend at least two network switches for redundancy, else
you'll regret it the first time you need to reboot a switch without
bringing down your cluster.

> -----Original Message-----
> From: linux-cluster-bounces@xxxxxxxxxx
[mailto:linux-cluster-bounces@xxxxxxxxxx]
> On Behalf Of Paras pradhan
> Sent: Friday, July 24, 2009 6:55 PM
> To: linux clustering
> Subject: Hardware recommendation
>
> hi,
>
> I will be creating a cluster using red hat EL 5.3 consisting of 3
> nodes which will run Xen virtual machines. The first two nodes will
> host around 30 virtual machines ( all paravirt Linux and some Solaris
> if possible) . The third node will be basically a fail over node and
> will host virtual machines if there is a problem at node 1 or node 2.
> I do not know if this is the right way to ask but I need
> recommendation on which CPU to choose (i7, phenom, quad core or dual
> core) and how much RAM do I need on node 1 and node 2 and on also node
> 3. And also which server hardware is recommended for my purpose. My
> test cluster is based on Dell Poweredge 1800 machines with DRAC 4
> (which I am using for fencing) and looks like DELL Poweregde server
> can be a good candidate.
>
> Any help is highly appreciated.
> Thanks
> Paras.
>
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster



--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster

 

--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster

[Index of Archives]     [Corosync Cluster Engine]     [GFS]     [Linux Virtualization]     [Centos Virtualization]     [Centos]     [Linux RAID]     [Fedora Users]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite Camping]

  Powered by Linux