Hi,
taking node2 down, updating the cluster configuration on node1 then
using "cman_tool version -r 7" on node1 and then booting node2 gives the
error below:
corosync[1790]: [QUORUM] This node is within the primary component and will provide service.
corosync[1790]: [QUORUM] Members[1]:
corosync[1790]: [QUORUM] 2
corosync[1790]: [CLM ] CLM CONFIGURATION CHANGE
corosync[1790]: [CLM ] New Configuration:
corosync[1790]: [CLM ] r(0) ip(192.168.122.228)
corosync[1790]: [CLM ] Members Left:
corosync[1790]: [CLM ] Members Joined:
corosync[1790]: [CLM ] CLM CONFIGURATION CHANGE
corosync[1790]: [CLM ] New Configuration:
corosync[1790]: [CLM ] r(0) ip(192.168.122.82)
corosync[1790]: [CLM ] r(0) ip(192.168.122.228)
corosync[1790]: [CLM ] Members Left:
corosync[1790]: [CLM ] Members Joined:
corosync[1790]: [CLM ] r(0) ip(192.168.122.82)
corosync[1790]: [TOTEM ] A processor joined or left the membership and a new membership was formed.
corosync[1790]: [CMAN ] Can't get updated config version 7, config file is version 5.
corosync[1790]: [QUORUM] This node is within the primary component and will provide service.
corosync[1790]: [QUORUM] Members[1]:
corosync[1790]: [QUORUM] 2
corosync[1790]: [CMAN ] Node 1 conflict, remote config version id=7, local=5
corosync[1790]: [MAIN ] Completed service synchronization, ready to provide service.
corosync[1790]: [CMAN ] Can't get updated config version 7, config file is version 5.
Afterwards corosync is spinning with 100% cpu usage. This is cluster
3.0.0 with corosync/openais 1.0.0. cluster.conf is attached. Any ideas?
Cheers,
-- Guido
<?xml version="1.0"?>
<cluster config_version="7" name="agx">
<cman two_node="1" expected_votes="2">
</cman>
<dlm log_debug="1"/>
<clusternodes>
<clusternode name="node1.foo.bar" nodeid="1" votes="1">
<fence>
<method name="1">
<device name="fence1"/>
</method>
</fence>
</clusternode>
<clusternode name="node2.foo.bar" nodeid="2" votes="1">
<fence>
<method name="1">
<device name="fence2"/>
</method>
</fence>
</clusternode>
</clusternodes>
<fencedevices>
<fencedevice agent="fence_xvm" domain="node1" name="fence1"/>
<fencedevice agent="fence_xvm" domain="node2" name="fence2"/>
</fencedevices>
<rm log_level="7">
<failoverdomains>
<failoverdomain name="kvm-hosts" ordered="1">
<failoverdomainnode name="node1.foo.bar"/>
<failoverdomainnode name="node2.foo.bar"/>
</failoverdomain>
</failoverdomains>
<resources>
<virt name="test11" />
<virt name="test12" />
</resources>
<service name="test11">
<virt ref="test11"/>
</service>
<service name="test12">
<virt ref="test12"/>
</service>
</rm>
</cluster>
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
