Correct, but if i use "expected_votes=1" under cman section, errors doesn't
disappears ...
Alexandre Gondim dos Santos wrote:
Your cluster must have more then 50% votes to be quorate.
Alexandre Gondim dos Santos
carlopmart escreveu:
Hi all,
I have setup three nodes with redhat cluster suite using rhel5.2. One
of this three nodes acts as a iscsi server an provides fence_gnbd to
the other ones. In this node I have configured fence_manual because is
the first node to start-up. But every time returns this errors until
node1 or node2 or both starts ...:
Dec 17 12:42:21 node3 dlm_controld[2568]: connect to ccs error -111,
check ccsd or cluster status
Dec 17 12:42:21 node3 ccsd[2538]: Cluster is not quorate. Refusing
connection.
Dec 17 12:42:21 node3 ccsd[2538]: Error while processing connect:
Connection refused
Dec 17 12:42:21 node3 ccsd[2538]: Cluster is not quorate. Refusing
connection.
Dec 17 12:42:21 node3 ccsd[2538]: Error while processing connect:
Connection refused
Dec 17 12:42:22 node3 ccsd[2538]: Cluster is not quorate. Refusing
connection.
My cluster.conf is:
<?xml version="1.0"?>
<cluster alias="RhelHomeCluster" config_version="4"
name="RhelHomeCluster">
<fence_daemon post_fail_delay="0" post_join_delay="3"/>
<clusternodes>
<clusternode name="node1" nodeid="2" votes="1">
<fence>
<method name="1">
<device name="gnbd-fence01"
nodename="node1"/>
</method>
</fence>
<multicast addr="239.192.75.55"
interface="eth0"/>
</clusternode>
<clusternode name="node2" nodeid="3" votes="1">
<fence>
<method name="1">
<device name="gnbd-fence01"
nodename="node2"/>
</method>
</fence>
<multicast addr="239.192.75.55"
interface="eth0"/>
</clusternode>
<clusternode name="node3" nodeid="1" votes="1">
<fence>
<method name="1">
<device name="last_resort"
nodename="node3"/>
</method>
</fence>
<multicast addr="239.192.75.55"
interface="eth1"/>
</clusternode>
</clusternodes>
<cman>
<multicast addr="239.192.75.55"/>
</cman>
<fencedevices>
<fencedevice agent="fence_gnbd" name="gnbd-fence01"
servers="node3"/>
<fencedevice agent="fence_manual" name="last_resort"/>
</fencedevices>
<rm log_facility="local4" log_level="7">
<failoverdomains>
<failoverdomain name="PriCluster" ordered="1"
restricted="1">
<failoverdomainnode name="node1"
priority="1"/>
<failoverdomainnode name="node2"
priority="2"/>
</failoverdomain>
<failoverdomain name="SecCluster" ordered="1"
restricted="1">
<failoverdomainnode name="node2"
priority="1"/>
<failoverdomainnode name="node1"
priority="2"/>
</failoverdomain>
</failoverdomains>
<resources>
<ip address="172.25.50.18" monitor_link="1"/>
</resources>
<service autostart="1" domain="SecCluster"
name="proxy-svc" recovery="relocate">
<ip ref="172.25.50.18">
<script
file="/data/configs/etc/init.d/squid" name="squid"/>
</ip>
</service>
</rm>
</cluster>
--
--
CL Martinez
carlopmart {at} gmail {d0t} com
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
