--- On Sat, 11/15/08, lingu <hicheerup@xxxxxxxxx> wrote: > From: lingu <hicheerup@xxxxxxxxx> > Subject: Re: RHEL3 Cluster Broken Pipe error and Heartbeat configuration > To: "linux clustering" <linux-cluster@xxxxxxxxxx> > Received: Saturday, November 15, 2008, 1:55 PM > Hi Lon, > > ############################################################ > Also anyone help me to configure a dedicated LAN (for > example eth3) > as heartbeat(private point to point cross over cable > network for > cluster communications),I don't wish heartbeat over > public LAN , > because of heavy Network saturation. > > Forthe above heartbeat configuration i didn't found > any suitable > document for RHEL. Can you provide me the suitable link or > guide > me what are all the changes i have to made in my existing > cluster.xml > file for this private heartbeat configuration to work. > ############################################################# > at least in the old cluster arch (rhel4) you only need to be sure the names of the nodes (the names of the hosts that you use in cluster.conf) resolve to the private network you want to use for internal comunication. example, in your cluster.conf your nodes names are: node1-int, node2-int, node3-int /etc/hosts in every node: 1.1.1.1 node1-int 1.1.1.2 node2-int 1.1.1.3 node3-int not 100% sure but I think the hostname don't need to match that names cu roger -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
