cluster-snmp setup question

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

I have a newly installed rhel4u7 32bit (2node) cluster.  I have
cluster-snmp-0.11.1-2.el4 installed, and I have added this to snmpd.conf
per instructions found in
/usr/share/doc/cluster-snmp-0.11.1/README.snmpd

--------
dlmod RedHatCluster     /usr/lib/cluster-snmp/libClusterMonitorSnmp.so
view    systemview      included        REDHAT-CLUSTER-MIB:RedHatCluster
--------


The problem is that the system only responds to snmpwalk on this:

root@db1: /etc/snmp # snmpwalk -v1 -c public localhost
.1.3.6.1.4.1.2312.8
SNMPv2-SMI::enterprises.2312.8.1.1.0 = INTEGER: 1

Any other OID silently completes with no output...
root@db1: /etc/snmp # snmpwalk -v1 -c public localhost
.1.3.6.1.4.1.2312.8.2.1.0
root@db1: /etc/snmp #

The 2nd snmpwalk should output the rhcClusterName as a STRING.

Note that REDHAT-MIB and REDHAT-CLUSTER-MIB are installed properly:
-rw-r--r--  1 root root 7957 Apr 14  2008
/usr/share/snmp/mibs/REDHAT-CLUSTER-MIB
-rw-r--r--  1 root root  772 Apr 14  2008
/usr/share/snmp/mibs/REDHAT-MIB


Did I miss some step in the setup (are there some services that need to
be started ?)
There are no hits for "snmp" on the cluster-wiki...


-- jer

--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster

[Index of Archives]     [Corosync Cluster Engine]     [GFS]     [Linux Virtualization]     [Centos Virtualization]     [Centos]     [Linux RAID]     [Fedora Users]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite Camping]

  Powered by Linux