The kbase article can be found at http://kbase.redhat.com/faq/FAQ_51_11755.shtm It has a link to Cisco's web site enumerating 5 possible solutions. http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008059a9df.shtml Leo J Pleiman Senior Consultant GPS, Red Hat Inc. 410.688.3873 ----- Original Message ----- From: "Jakub Suchy" <jakub.suchy@xxxxxxxxxx> To: linux-cluster@xxxxxxxxxx Sent: Wednesday, October 1, 2008 3:04:48 PM GMT -05:00 US/Canada Eastern Subject: Cisco working configuration Hello all, because we are still struggling with RHEL5.2 cluster together with Cisco network infrastructure, I'd like to ask if there is somebody which has this configuration working: RHEL5.2 cluster + Cisco 6500/4500/3500 infrastructure, heartbeat going through these switches, nodes are not linked through crossover cable. If so, can you please contact me for further details? I would very much appreciate the help. Thank you, Jakub Suchy -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
