Hello Dave, RE: HP DL380 G4 & cluster fencing options Using ILO fencing should work fine as long as the ILO for 'all' of the cluster node are connected to the same physical network and IP subnet. The ILO IP network does not need to be the same as the heartbeat/admin traffic network. Regards, James Hofmeister Hewlett Packard Linux Solutions Engineer |-----Original Message----- |From: linux-cluster-bounces@xxxxxxxxxx |[mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Jones, Dave |Sent: Friday, September 26, 2008 2:52 PM |To: Linux-cluster@xxxxxxxxxx |Subject: HP DL380 G4 & cluster fencing options | | | |(I apologize if this double-posts, long story) | |Hello all. | |I have what I hope are a few simple questions on RHEL 5.2 |clustering using HP DL380 hardware. | |Long story short, we have several HP DL380-G4s that we are |trying to set up in a test cluster but we do not have any of |the obvious fencing options available to us. ILO fencing does |not seem to be an option because our standards dictate ILO be |on an out-of-band network. |We have SCSI fencing in place but I'm not convinced it is |working properly nor that it is reliable. |I hope to find funding to get an APC Masterswitch in place but |that is not our standard so I need approval. | |In the meantime, can anyone offer any answers on the following |questions? | |1) Are TripLite or other power controllers supported aside |from what is on the hardware list? | (http://www.redhat.com/cluster_suite/hardware/) | |2) Is there a reliable way to change the SAN switch fencing |controls to use SNMP (preferred) or perhaps SSH? | According to 'man fence_brocade' the system uses telnet. | An interactive login to a 256-port switch is bad |enough, but doing so over an unencrypted telnet session just |isn't going to fly! | I would think this would be a relatively trivial |change to the script. | Has anyone done something like it? | |3) Does anyone have any experience clustering DL380s and have |recommended Primary & Secondary fencing methods or advice they |would be willing to share? | |4) Is anyone out there using only 1 fencing method with GFS |filesystems in Production environment? | |Thanks, |Dave | |Confidentiality Warning: This e-mail contains information |intended only for the use of the individual or entity named |above. If the reader of this e-mail is not the intended |recipient or the employee or agent responsible for delivering |it to the intended recipient, any dissemination, publication |or copying of this e-mail is strictly prohibited. The sender |does not accept any responsibility for any loss, disruption or |damage to your data or computer system that may occur while |using data contained in, or transmitted with, this e-mail. |If you have received this e-mail in error, please immediately |notify us by return e-mail. Thank you. | | | | |-- |Linux-cluster mailing list |Linux-cluster@xxxxxxxxxx |https://www.redhat.com/mailman/listinfo/linux-cluster | -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
