Dear All,
Currently I have successfully configured IPMILAN fencing to both the
servers and Ethernet Channel Bonding as per the below link
http://www.redhat.com/docs/manuals/csgfs/browse/rh-cs-en/s1-hardware-connect.html#S2-HARDWARE-ETHBOND
After the Fencing and Ethernet Channel Bonding both the servers are
getting rebooted alternatively (because of fencing by peer node)
I've attached the following files for your reference
From server-1, (corviewprimary)
1. /var/log/messages ( Refer messages from Sep 10 15:20:22)
2./etc/cluster/cluster.conf
3./etc/sysconfig/network-scripts/ifcfg-eth0
4./etc/sysconfig/network-scripts/ifcfg-eth1
5./etc/sysconfig/network-scripts/ifcfg-bond0
as primary.zip
From server-2, (corviewsecondary)
1. /var/log/messages ( Refer messages from Sep 10 15:24:07)
2./etc/cluster/cluster.conf
3./etc/sysconfig/network-scripts/ifcfg-eth0
4./etc/sysconfig/network-scripts/ifcfg-eth1
5./etc/sysconfig/network-scripts/ifcfg-bond0
as secondary.zip
Is this happening only when i use bonding.
Can some one throw light on this peculiar problem
Regards
-S.Balaji
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
