Are you sure you are using an actual M600 blade chassis? On the ones I've got, they speak a different language after the telnet from other DRAC cards, hence the problem. 2008/7/29 Brandon Young <bkyoung@xxxxxxxxx>: > I use this method of fencing on my cluster. With RHCS, there is a supplied > fencing script for DRAC cards. The trick is you have to enable telnet on > the DRAC cards for the supplied script to work (you can either do this > through the web interface, or install the Dell Management Software and issue > some command I don't remember right now). Since the DRAC cards are (should > be) on a private network, this is not too bad of a problem. > > On Tue, Jul 29, 2008 at 10:42 AM, David J Craigon <david@xxxxxxxxxxxxx> > wrote: >> >> Hello, >> >> I've been given the job of getting a box of Dell blades (an M600) >> fencing correctly using the onboard DRACs (which Dell call an iDRAC). >> As far as I can tell, no one has done this- none of the existing >> fence_ scripts appear to do the trick. The command line interface is >> very different from a traditional Dell DRAC. >> >> Has anyone already done this? I'm going to write a fence script to do >> this, but I thought I'd check before I wasted my time. >> >> Thanks everyone, >> >> David >> >> -- >> Linux-cluster mailing list >> Linux-cluster@xxxxxxxxxx >> https://www.redhat.com/mailman/listinfo/linux-cluster > > > -- > Linux-cluster mailing list > Linux-cluster@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/linux-cluster > -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
