RE: 3 node cluster problems

["Dalton, Maurice" <bobby.m.dalton@xxxxxxxx>]

The last post is incorrect.

Fence is still hanging at start up.

 

Here’s another log message.

 

Mar 24 19:03:14 csarcsys3-eth0 ccsd[6425]: Error while processing connect: Connection refused

Mar 24 19:03:15 csarcsys3-eth0 dlm_controld[6453]: connect to ccs error -111, check ccsd or cluster status

 

 

 

From: linux-cluster-bounces@xxxxxxxxxx [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Bennie Thomas
Sent: Monday, March 24, 2008 11:22 AM
To: linux clustering
Subject: Re: 3 node cluster problems

 

try removing  the fully qualified hostname from the cluster.conf file.
 

Dalton, Maurice wrote:

 

I have NO fencing equipment

 

I have been task to setup a 3 node cluster

 

 

Currently I have having problems getting cman(fence) to start

 

Fence will try to start up during cman start up but will fail

I tried to run /sbin/fenced –D    - I get the following

1206373475 cman_init error 0 111

 

 

Here’s my cluster.conf file

 

<?xml version="1.0"?>

<cluster alias="csarcsys51" config_version="26" name="csarcsys51">

        <fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="3"/>

        <clusternodes>

                <clusternode name="csarcsys1-eth0.xxx.xxxx.nasa.gov" nodeid="1" votes="1">

                        <fence/>

                </clusternode>

                <clusternode name="csarcsys2-eth0.xxx.xxxx.nasa.gov" nodeid="2" votes="1">

                        <fence/>

                </clusternode>

                <clusternode name="csarcsys3-eth0.xxx.xxxxnasa.gov" nodeid="3" votes="1">

                        <fence/>

                </clusternode>

        </clusternodes>

        <cman/>

        <fencedevices/>

        <rm>

                <failoverdomains>

                        <failoverdomain name="csarcsys-fo" ordered="1" restricted="0">

                                <failoverdomainnode name="csarcsys1-eth0.xxx.xxxx.nasa.gov" priority="1"/>

                                <failoverdomainnode name="csarcsys2-eth0.xxx.xxxx.nasa.gov" priority="1"/>

                               <failoverdomainnode name="csarcsys2-eth0.xxx.xxxx.nasa.gov" priority="1"/>

                        </failoverdomain>

                </failoverdomains>

                <resources>

                        <ip address="xxx.xxx.xxx.xxx" monitor_link="1"/>

                        <fs device="/dev/sdc1" force_fsck="0" force_unmount="1" fsid="57739" fstype="ext3" mountpo

int="/csarc-test" name="csarcsys-fs" options="rw" self_fence="0"/>

                        <nfsexport name="csarcsys-export"/>

                        <nfsclient name="csarcsys-nfs-client" options="no_root_squash,rw" path="/csarc-test" targe

t="xxx.xxx.xxx.*"/>

                </resources>

        </rm>

</cluster>

 

 

 

Messages from the logs

ar 24 13:24:19 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate.  Refusing connection.

Mar 24 13:24:19 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused

Mar 24 13:24:20 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate.  Refusing connection.

Mar 24 13:24:20 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused

Mar 24 13:24:21 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate.  Refusing connection.

Mar 24 13:24:21 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused

Mar 24 13:24:22 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate.  Refusing connection.

Mar 24 13:24:22 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused

Mar 24 13:24:23 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate.  Refusing connection.

Mar 24 13:24:23 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused

 

 

--

Linux-cluster mailing list

Linux-cluster@xxxxxxxxxx

https://www.redhat.com/mailman/listinfo/linux-cluster

 

--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster