While testing RHEL 5.1 to suit my needs (simple samba 2 nodes failover) Im running into this issue. When poweroff node that service is running cluster dont relocate service to another node. If killall smbd, cluster detects that samba dies and relocate properly to another node. Conga display Unknown node state for that node poweroff, but still displaying that service is active/running in this node (powered off node)??? Cheers, Juliano. Feb 18 15:17:05 node2 openais[1982]: [CLM ] New Configuration: Feb 18 15:17:05 node2 openais[1982]: [CLM ] r(0) ip(10.0.0.2) Feb 18 15:17:05 node2 openais[1982]: [CLM ] Members Left: Feb 18 15:17:05 node2 openais[1982]: [CLM ] Members Joined: Feb 18 15:17:05 node2 openais[1982]: [SYNC ] This node is within the primary component and will provide service. Feb 18 15:17:05 node2 fence_manual: Node node1.cluster needs to be reset before recovery can procede. Waiting for node1.cluster to rejoin the cluster or for manual acknowledgement that it has been reset (i.e. fence_ack_manual -n node1.cluster) Feb 18 15:17:05 node2 openais[1982]: [TOTEM] entering OPERATIONAL state. Feb 18 15:17:05 node2 openais[1982]: [CLM ] got nodejoin message 10.0.0.2 Feb 18 15:17:05 node2 openais[1982]: [CPG ] got joinlist message from node 2 <?xml version="1.0"?> <cluster alias="CAMPIXCLU" config_version="22" name="CAMPIXCLU"> <fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="3"/> <clusternodes> <clusternode name="node1.cluster" nodeid="1" votes="1"> <fence> <method name="1"> <device name="node1" nodename="node1.cluster"/> </method> </fence> </clusternode> <clusternode name="node2.cluster" nodeid="2" votes="1"> <fence> <method name="1"> <device name="node2" nodename="node2.cluster"/> </method> </fence> </clusternode> </clusternodes> <cman expected_votes="1" two_node="1"/> <fencedevices> <fencedevice agent="fence_manual" name="node1"/> <fencedevice agent="fence_manual" name="node2"/> </fencedevices> <rm> <failoverdomains> <failoverdomain name="sambaha" ordered="1" restricted="1"> <failoverdomainnode name="node1.cluster" priority="2"/> <failoverdomainnode name="node2.cluster" priority="1"/> </failoverdomain> </failoverdomains> <resources/> <service autostart="1" domain="sambaha" exclusive="0" name="samba00" recovery="relocate"> <smb name="vendas" workgroup="CAMPIX"> <ip address="10.0.0.10/24" monitor_link="1"/> </smb> </service> </rm> </cluster> |
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
