On Sun, 2007-12-23 at 08:16 +0400, Harun wrote: > Issue: When network cable is disconnected from the Primary, primary restart > unclean and the failover to secondary do not happens. The shared drives > don't get mounted automatically for secondary neither gets it mounted on > primary, after the primary restarts. I have to then manually shut down both > Primary and Secondary, and start primary first and then secondary for the > setup to work fine again. > I want to test a live production setup... a Linux Cluster with 2 nodes, in > Linux Advanced Server (Linux DB-Primary 2.4.21-37.ELsmp #1 SMP Wed Sep 7 > 13:28:55 EDT 2005 i686 i686 i386 GNU/Linux ), Oracle data base is running on > this setup. > > The clumanager version is 1.2.28 and redhat-config-cluster version is 1.0.8 > on both primary and secondary.I want to resolve the issue with out any > upgradations. Do you think that updating can resolve the issue? If > upgradation is required please guide how to go ahead. I am trying to resolve > this issue with out any patch update. > Is this a configuration problem or some knows issue with the version used. > > Cluster.xml looks like this. > > <?xml version="1.0" ?> > - <cluconfig version="3.0"> > <clumembd broadcast="no" interval="1000000" loglevel="5" multicast="yes" > multicast_ipaddress="225.0.0.11" thread="yes" tko_count="25" /> > <cluquorumd loglevel="5" pinginterval="2" tiebreaker_ip="" /> Set a tiebreaker_ip if you don't want it to survive network splits. This IP needs to be on the same network as the IPs which map to the hosts "DB-Primary" and "DB-Secondary", but must not reside on the hosts themselves (use a switch IP, another host, or gateway) Also, set monitor_link to 1 in the service_ipaddress ... -- Lon -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
