Just check if port forwarding is enabled. in your lvs router.
Paste the output of sysctl -p
jimmy.nimo@xxxxxxxxxxxx wrote:
I take your recommendation and change the gateway in the
real server to
10.11.12.9 (I really think that it has to use the 10.11.12.10 because
if you
have a backup lvs Router, it change is the virtual ip eth1:1 not the
real ip)
and don't work either
btw I run a nmap to the virtual server and this is the output:
root@Cancer:~# nmap -sT 172.16.247.150
Starting Nmap 4.20 ( http://insecure.org ) at 2007-11-06 09:42 VET
Interesting ports on 172.16.247.150:
Not shown: 1693 closed ports
PORT STATE SERVICE
22/tcp open ssh
111/tcp open rpcbind
443/tcp open https
815/tcp open unknown
it dosn't have the http port open, I don't have a firewall, I have the
iptables
down in all the server, I really don't know what happen, anyone can
help?¡
Quoting GS R <gsrlinux@xxxxxxxxx>:
On 11/6/07, jimmy.nimo@xxxxxxxxxxxx
<jimmy.nimo@xxxxxxxxxxxx> wrote:
Hello, thanks for reading my email,
Welcome :)
I have a problem and perphaps someone in the
list can work it out
I have 3 working redhat 4 update 5 trying to work with
piranha+lvs+nanny,
2 Real
Server and 1 LVS Router, the router have 2 NIC, 1 with IP
172.16.247.130
(eht0),
and the other with 10.11.12.9(eth1), the real server are 10.11.12.11
and
10.11.12.12, I want to put the virtual server to run in the ip
172.16.247.150
(eth0:1) and the gateway in the real servers are 10.11.12.10 (eth1:1 in
the
router server),
Since you have configured LVS- NAT your gateway on the real servers
should
be 10.11.12.9
I create the lvs.cf with piranha and start pulse, but, NOTHING
happens, piranha create the 10.11.12.10 and
the 172.16.247.150 virtual
interfaces (I can conect to the gui of piranha in
http://172.16.247.150:3636)
but can't do in the port 80. here are my lvs.cf
serial_no = 137
primary = 172.16.247.130
primary_private = 10.11.12.9
service = lvs
backup_active = 0
backup = 172.16.247.131
backup_private = 10.11.12.11
heartbeat = 1
heartbeat_port = 539
keepalive = 3
deadtime = 10
network = nat
nat_router = 10.11.12.10 eth1:1
nat_nmask = 255.255.255.0
debug_level = NONE
monitor_links = 0
virtual http {
active = 1
address = 172.16.247.150 eth0:1
vip_nmask = 255.255.255.0
port = 80
use_regex = 0
load_monitor = ruptime
You should start 'rwhod' service on the real servers since you opted
for
'load_monitor' as ruptime.
scheduler = rr
protocol = tcp
timeout = 5
reentry = 5
quiesce_server = 0
server uno {
address = 10.11.12.11
active = 1
weight = 1
}
server dos {
address = 10.11.12.12
active = 1
weight = 1
}
}
Rest configuration looks fine.
and I don't know why, but the ipsvadmin don't show the entrys of the
real
servers:
[root@node1 ~]# ipvsadm -Ln
IP Virtual Server version 1.2.0 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 172.16.247.150:80 rr
Make sure you have the 80 port up and running on your real servers.
can anyone help me? (sorry for my bad english)
-GSR
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
|
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
