I'm experiencing something similar. I was wondering if there was some additional information available regarding the "e1000 + multiple NIC problem". Thanks in advance, Jeff On Fri, 2006-02-10 at 07:16 -0500, danwest wrote: > Has anyone every seen something like this? A modprobe with either a > "module 0" or a blank "module " is always followed by the interface > loosing its VIP and thus initiating a service failure. All non > essential system services were turned off. Not sure what is > calling/causing the strange modprobe. Logs are clean, no other events > leading up to this. I am now wondering if it could be the cluster > itself? > > Feb 9 13:44:32 node2 modprobe: modprobe: Can't locate module 0 > Feb 9 13:44:32 node2 clusvcmgrd: [18150]: <err> service error: IP > address 147.107.188.81 missing > Feb 9 13:44:32 node2 clusvcmgrd: [18150]: <err> service error: 0: error > fetching interface information: Device not found > Feb 9 13:44:32 node2 clusvcmgrd: [18150]: <err> service error: Check > status failed on IP addresses for mservice1 Sounds like the e1000 + multiple NIC problem. -- Lon -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
