Jim could you send that script as an attachment? When I run it from luci
I'm getting the following errors in /var/log/messages Seems to work when
I do it from the command line though
Oct 18 18:03:33 nfs-7 fence_node[11985]: agent "fence_apc" reports:
Traceback (most recent call last): File "/sbin/fence_apc", line 832, in ?
main() File "/sbin/fence_apc", line 303, in main do_power_off(sock)
File "/sbin/fence_apc", line 816, in do_power_off x =
do_power_switch(sock, "off") File "/sbi
Oct 18 18:03:33 nfs-7 fence_node[11985]: agent "fence_apc" reports:
n/fence_apc", line 611, in do_power_switch result_code, response =
power_off(txt + ndbuf) File "/sbin/fence_apc", line 820, in power_off
x = power_switch(buffer, False, "2", "3"); File "/sbin/fence_apc", line
813, in power_switch raise "un
Oct 18 18:03:33 nfs-7 fence_node[11985]: agent "fence_apc" reports: known
screen encountered in \n" + str(lines) + "\n" unknown screen encountered in
['', '> 1', '', '', '------- Phase Management
------------------------------------------------------', '', ' Phase
Load : 3.9', ' Phase State: Normal Load ',
Oct 18 18:03:33 nfs-7 fence_node[11985]: agent "fence_apc" reports: '', '
1- Overload Alarm Threshold(amps) : 12', ' 2- Near Overload
Warning Threshold(amps): 8', ' 3- Low Load Warning Threshold(amps) :
0', ' 4- Accept Changes : ', '', ' ?- Help,
<ESC>- Back, <ENTER>- R
Oct 18 18:03:33 nfs-7 fence_node[11985]: agent "fence_apc" reports: efresh,
<CTRL-L>- Event Log']
Oct 18 18:03:33 nfs-7 fence_node[11985]: Fence of "nfs-6.cdc.nicusa.com" was
unsuccessful
On 10/18/07 5:21 PM, "jim parsons" <jparsons@xxxxxxxxxx> wrote:
> Try this one. It is slated for the next update. Just drop in to /sbin on
> every node.
>
> -j
>
>
> On Thu, 2007-10-18 at 17:14 -0400, Josh Gray wrote:
>> I'm getting a menu not recognized error when I try fencing with the switches
>> I just picked up. Is a certain OS or Firmware required?
>>
>>
>> # /sbin/fence_apc -a 10.0.0.xxx -l admin -n 2 -o off -p xxx -v
>> failed: unrecognised menu response
>>
>> # cat /tmp/apclog
>>
>> User Name : admin
>> Password : **********
>>
>>
>>> From the gui:
>>
>> Hardware Factory
>>
>> Model Number: AP7900
>> Hardware Revision: B2
>> Manufacture Date: 08/17/2007
>> Management Uptime: 0 Days 3 Hours 8 Minutes
>>
>>
>>
>> Application Module
>>
>> Name: rpdu
>> Version: v3.3.3
>> Date: 01/05/2007
>> Time: 14:56:33
>>
>>
>>
>> APC OS (AOS)
>>
>> Name: aos
>> Version: v3.3.4
>> Date: 01/05/2007
>> Time:
>>
>>
> #!/usr/bin/python
>
>
##############################################################################>
#
>
##############################################################################>
#
> ##
> ## Copyright (C) 2006 Red Hat, Inc. All rights reserved.
> ##
> ## This copyrighted material is made available to anyone wishing to use,
> ## modify, copy, or redistribute it subject to the terms and conditions
> ## of the GNU General Public License v.2.
> ##
>
##############################################################################>
#
>
##############################################################################>
#
>
> import getopt, sys
> import os
> import socket
> import time
>
> from telnetlib import Telnet
>
> TELNET_TIMEOUT=5 #How long to wait for a response from a telnet try
>
> # WARNING!! Do not add code bewteen "#BEGIN_VERSION_GENERATION" and
> # "#END_VERSION_GENERATION" It is generated by the Makefile
>
> #BEGIN_VERSION_GENERATION
> FENCE_RELEASE_NAME="New APC Agent - test release"
> REDHAT_COPYRIGHT=""
> BUILD_DATE="September 21, 2006"
> #END_VERSION_GENERATION
>
> POWER_OFF = 0
> POWER_ON = 1
> POWER_STATUS = 2
> POWER_REBOOT = 3
>
> COMPLETE = 0
> NOT_COMPLETE = 1
>
> ON = "ON"
> OFF = "OFF"
>
> SUCCESS = "success"
> FAIL = "fail"
>
> address = ""
> login = ""
> passwd = ""
> passwd_script = ""
> port = ""
> switchnum = ""
> action = POWER_REBOOT #default action
> verbose = False
>
> logfile = None
>
> #set up regex list
> CONTROL_CONSOLE = "Control Console -----"
> DEVICE_MANAGER = "Device Manager -----"
> OUTLET_CONTROL = "- Outlet Control/Configuration -----"
> OUTLET_MANAGE = "- Outlet Management -----"
> CONTROL_OUTLET = "- Control Outlet -----"
> CONTROL_OUTLET_2 = "- Outlet Control "
> COMMAND_SUCCESS = "Command successfully issued."
> COMMAND_SUCCESS_2 = " Success"
> CONFIRM = "Enter 'YES' to continue or <ENTER> to cancel :"
> CONTINUE = "Press <ENTER> to continue..."
> SCREEN_END = "<ESC>- Main Menu, <ENTER>- Refresh, <CTRL-L>- Event Log"
> SCREEN_END_2 = "<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log"
> USERNAME = "User Name :"
> PASSWORD = "Password :"
> MASTER = "------- MasterSwitch"
> FIRMWARE_STR = "Rack PDU APP"
>
> CONTINUE_INDEX = 0
>
> FIRMWARE_REV = 2
>
> regex_list = list()
> regex_list.append(CONTINUE)
> regex_list.append(SCREEN_END)
> regex_list.append(SCREEN_END_2)
> regex_list.append(USERNAME)
> regex_list.append(PASSWORD)
>
> def usage():
> print "Usage:\n"
> print "fence_apc [options]"
> print "Options:"
> print " -a <ipaddress> ip or hostname of APC switch"
> print " -h print out help"
> print " -l [login] login name"
> print " -n [port] switch port"
> print " -p [password] password"
> print " -S [path] script to run to retrieve password"
> print " -o [action] Reboot (default), Off, On, or Status"
> print " -v Verbose Verbose mode - writes file to
> /tmp/apclog"
> print " -V Print Version, then exit"
>
> sys.exit (0)
>
> def version():
> print "fence_apc %s %s\n" % (FENCE_RELEASE_NAME, BUILD_DATE)
> print "%s\n" % REDHAT_COPYRIGHT
> sys.exit(0)
>
> def main():
>
> global address, login, passwd, passwd_script, port, action, verbose,
> logfile, switchnum
>
> if len(sys.argv) > 1:
> try:
> opts, args = getopt.getopt(sys.argv[1:], "a:hl:o:n:p:S:vV", ["help",
> "output="])
> except getopt.GetoptError:
> #print help info and quit
> usage()
> sys.exit(2)
>
> for o, a in opts:
> if o == "-v":
> verbose = True
> if o == "-V":
> version()
> if o in ("-h", "--help"):
> usage()
> sys.exit()
> if o == "-l":
> login = a
> if o == "-p":
> passwd = a
> if o == "-S":
> passwd_script = a
> if o == "-n":
> dex = a.find(":")
> if dex == (-1):
> port = a
> else:
> switchnum = a[:dex]
> port = a[(dex+1):]
> if o == "-o":
> if a == "Off" or a == "OFF" or a == "off":
> action = POWER_OFF
> elif a == "On" or a == "ON" or a == "on":
> action = POWER_ON
> elif a == "Status" or a == "STATUS" or a == "status":
> action = POWER_STATUS
> elif a == "Reboot" or a == "REBOOT" or a == "reboot":
> action = POWER_REBOOT
> else:
> usage()
> sys.exit()
> if o == "-a":
> address = a
> if address == "" or login == "" or (passwd == "" and passwd_script == "")
> or port == "":
> usage()
> sys.exit()
>
> else: #Take args from stdin...
> params = {}
> #place params in dict
> for line in sys.stdin:
> val = line.split("=")
> if len(val) == 2:
> params[val[0].strip()] = val[1].strip()
>
> try:
> address = params["ipaddr"]
> except KeyError, e:
> sys.stderr.write("FENCE: Missing ipaddr param for fence_apc...exiting")
> sys.exit(1)
> try:
> login = params["login"]
> except KeyError, e:
> sys.stderr.write("FENCE: Missing login param for fence_apc...exiting")
> sys.exit(1)
> try:
> if 'passwd' in params:
> passwd = params["passwd"]
> if 'passwd_script' in params:
> passwd_script = params['passwd_script']
> if passwd == "" and passwd_script == "":
> raise "missing password"
> except:
> sys.stderr.write("FENCE: Missing passwd for fence_apc...exiting")
> sys.exit(1)
> try:
> port = params["port"]
> except KeyError, e:
> sys.stderr.write("FENCE: Missing port param for fence_apc...exiting")
> sys.exit(1)
> try:
> switchnum = params["switch"]
> except KeyError, e:
> pass
> try:
> verbose = params["verbose"]
> verbose = (verbose == 'True' or verbose == 'true' or verbose == 'TRUE')
> except KeyError, e:
> pass
>
> try:
> a = params["option"]
> if a == "Off" or a == "OFF" or a == "off":
> action = POWER_OFF
> elif a == "On" or a == "ON" or a == "on":
> action = POWER_ON
> elif a == "Reboot" or a == "REBOOT" or a == "reboot":
> action = POWER_REBOOT
> except KeyError, e:
> action = POWER_REBOOT
>
> #### End of stdin section
>
>
> # retrieve passwd from passwd_script (if specified)
> passwd_scr = ''
> if len(passwd_script):
> try:
> if not os.access(passwd_script, os.X_OK):
> raise 'script not executable'
> p = os.popen(passwd_script, 'r', 1024)
> passwd_scr = p.readline().strip()
> if p.close() != None:
> raise 'script failed'
> except:
> sys.stderr.write('password-script "%s" failed\n' % passwd_script)
> passwd_scr = ''
>
> if passwd == "" and passwd_scr == "":
> sys.stderr.write('password not available, exiting...')
> sys.exit(1)
> elif passwd == passwd_scr:
> pass
> elif passwd and passwd_scr:
> # execute self, with password_scr as passwd,
> # if that fails, continue with "passwd" argument as password
> if len(sys.argv) > 1:
> comm = sys.argv[0]
> skip_next = False
> for w in sys.argv[1:]:
> if skip_next:
> skip_next = False
> elif w in ['-p', '-S']:
> skip_next = True
> else:
> comm += ' ' + w
> comm += ' -p ' + passwd_scr
> ret = os.system(comm)
> if ret != -1 and os.WIFEXITED(ret) and os.WEXITSTATUS(ret) == 0:
> # success
> sys.exit(0)
> else:
> sys.stderr.write('Use of password from "passwd_script" failed, trying
> "passwd" argument\n')
> else: # use stdin
> p = os.popen(sys.argv[0], 'w', 1024)
> for par in params:
> if par not in ['passwd', 'passwd_script']:
> p.write(par + '=' + params[par] + '\n')
> p.write('passwd=' + passwd_scr + '\n')
> p.flush()
> if p.close() == None:
> # success
> sys.exit(0)
> else:
> sys.stderr.write('Use of password from "passwd_script" failed, trying
> "passwd" argument\n')
> elif passwd_scr:
> passwd = passwd_scr
> # passwd all set
>
>
>
> ### Order of events
> # 0) If verbose, prepare log file handle
> # 1) Open socket
> # 2) Log in
> # 3) Evaluate task. Task will be one of:
> # 3a - Check status and print to stdout (or log file if verbose)
> # 3b - Turn a port off, then confirm
> # 3c - Turn a port on, then confirm
> # 3d - Reboot by turning a port off, then on, and confirming each step.
>
> if verbose:
> setup_logging()
>
> sock = setup_socket()
>
> # Ok, now lets log in...
> do_login(sock)
>
> # Now we should be at the outside Control screen
>
> if action == POWER_STATUS:
> # We should be at the Control screen, so we need to write a '1'
> # to kick things off
> sock.write("1\r")
> statusval = do_status_check(sock)
> backout(sock)
> sock.write("4\r") # Logs out
>
> elif action == POWER_OFF:
> sock.write("1\r")
> do_power_off(sock)
> backout(sock) # Return to control screen
> statusval = do_status_check(sock)
> if statusval == OFF:
> if verbose:
> logit("Power Off successful\n")
> print "Power Off successful"
> backout(sock)
> sock.write("4\r") # Logs out
> sock.close()
> sys.exit(0)
> else:
> if verbose:
> logit("Power Off unsuccessful\n")
> logit("Undetermined error\n")
> sys.stderr.write("Power Off unsuccessful")
> backout(sock)
> sock.write("4\r") # Logs out
> sock.close()
> sys.exit(1)
>
> elif action == POWER_ON:
> sock.write("1\r")
> do_power_on(sock)
> backout(sock) # Return to control screen
> statusval = do_status_check(sock)
> if statusval == ON:
> if verbose:
> logit("Power On successful\n")
> print "Power On successful"
> backout(sock)
> sock.write("4\r") # logs out
> sock.close()
> sys.exit(0)
> else:
> if verbose:
> logit("Power On unsuccessful\n")
> logit("Undetermined error\n")
> sys.stderr.write("Power On unsuccessful")
> backout(sock)
> sock.write("4\r") # Logs out
> sock.close()
> sys.exit(1)
>
> elif action == POWER_REBOOT:
> sock.write("1\r")
> do_power_off(sock)
> backout(sock) # Return to control screen
> statusval = do_status_check(sock)
> if statusval == OFF:
> if verbose:
> logit("Power Off successful\n")
> print "Power Off successful"
> backout(sock)
> else:
> if verbose:
> logit("Power Off unsuccessful\n")
> logit("Undetermined error\n")
> sys.stderr.write("Power Off unsuccessful")
> backout(sock)
> sock.write("4\r") # Logs out
> sock.close()
> sys.exit(1)
> do_power_on(sock)
> backout(sock) # Return to control screen
> statusval = do_status_check(sock)
> if statusval == ON:
> if verbose:
> logit("Power Reboot successful\n")
> print "Power Reboot successful"
> backout(sock)
> sock.write("4\r") # Logs out
> sock.close()
> sys.exit(0)
> else:
> if verbose:
> logit("Power Reboot unsuccessful\n")
> logit("Undetermined error\n")
> sys.stderr.write("Power Reboot unsuccessful")
> backout(sock)
> sock.write("4\r") # Logs out
> sock.close()
> sys.exit(1)
>
> sock.close()
>
> def backout(sock):
> sock.write(chr(27))
>
> while (1):
> i, mo, txt = sock.expect(regex_list, TELNET_TIMEOUT)
>
> if regex_list[i] == SCREEN_END:
> break
> elif regex_list[i] == SCREEN_END_2:
> sock.write(chr(27))
>
> def setup_socket():
> ## Time to open telnet session and log in.
> try:
> sock = Telnet(address.strip())
> except socket.error, (errno, msg):
> my_msg = "FENCE: A problem was encountered opening a telnet session with "
> + address
> if verbose:
> logit(my_msg)
> logit("FENCE: Error number: %d -- Message: %s\n" % (errno, msg))
> logit("Firewall issue? Correct address?\n")
>
> sys.stderr.write(my_msg)
> sys.stderr.write(("FENCE: Error number: %d -- Message: %s\n" % (errno,
> msg)))
> sys.stderr.write("Firewall issue? Correct address?\n")
> sys.exit(1)
>
> if verbose:
> logit("\nsocket open to %s\n" % address)
>
> return sock
>
> def setup_logging( log_location="/tmp/apclog"):
> global logfile
> try:
> logfile = open(log_location, 'a')
> logfile.write("###############################################\n")
> logfile.write("Telnetting to apc switch %s\n" % address)
> now = time.localtime(time.time())
> logfile.write(time.asctime(now))
> except IOError, e:
> sys.stderr.write("Failed to open log file %s" % log_location)
> logfile = None
>
> def logit(instr):
> if logfile != None:
> logfile.write(instr)
>
> def do_login(sock):
> result_code = 1
>
> ## This loop tries to assemble complete telnet screens and passes
> ## them to helper methods to handle responses accordingly.
> while result_code:
> try:
> i, mo, txt = sock.expect(regex_list, TELNET_TIMEOUT)
> except socket.error, (errno, msg):
> my_msg = "FENCE: A problem was encountered opening a telnet session with
> " + address + "\n"
> if verbose:
> logit(my_msg)
> logit("FENCE: Error number: %d -- Message: %s\n" % (errno, msg))
>
> sys.stderr.write(my_msg)
> sys.stderr.write(("FENCE: Error number: %d -- Message: %s\n" % (errno,
> msg)))
> sys.exit(1)
>
> if i == CONTINUE_INDEX: # Capture the rest of the screen...
> sock.write("\r")
> ii,moo,txtt = sock.expect(regex_list, TELNET_TIMEOUT)
> txt = txt + txtt
>
> ndbuf = sock.read_eager() # Scoop up remainder
> if verbose:
> logit(txt + ndbuf)
> result_code,response = log_in(txt + ndbuf)
> if result_code:
> try:
> sock.write(response)
> except socket.error, (errno, msg):
> if verbose:
> logit("Error #%s" % errno)
> logit(msg)
> sys.stderr.write("Error #%s: %s" % (errno,msg))
> sys.exit(1)
>
> def log_in(buffer):
> global FIRMWARE_REV
> lines = buffer.splitlines()
>
> for i in lines:
> if i.find(USERNAME) != (-1):
> if verbose:
> logit("Sending login: %s\n" % login)
> return (NOT_COMPLETE, login + "\r")
> elif i.find(PASSWORD) != (-1):
> if verbose:
> logit("Sending password: %s\n" % passwd)
> return (NOT_COMPLETE, passwd + "\r")
> elif i.find(CONTROL_CONSOLE) != (-1):
> #while we are here, grab the firmware revision
> rev_search_lines = buffer.splitlines()
> for rev_search_line in rev_search_lines: #search screen again
> rev_dex = rev_search_line.find(FIRMWARE_STR)
> if rev_dex != (-1): #found revision line
> scratch_rev = rev_search_line[rev_dex:]
> v_dex = scratch_rev.find("v")
> if v_dex != (-1):
> if scratch_rev[v_dex + 1] == "3": #format is v3.3.4
> FIRMWARE_REV = 3
> break
> return (COMPLETE, "1\r")
>
> def do_status_check(sock):
> result_code = 1
> while result_code:
> i, mo, txt = sock.expect(regex_list, TELNET_TIMEOUT)
> if i == CONTINUE_INDEX: # Capture the rest of the screen...
> sock.write("\r")
> ii,moo,txtt = sock.expect(regex_list, TELNET_TIMEOUT)
> txt = txt + txtt
>
> ndbuf = sock.read_eager() # Scoop up remainder
> if verbose:
> logit(txt + ndbuf)
> (result_code,response,statusval) = return_status(txt + ndbuf)
> if result_code:
> try:
> sock.write(response)
> except socket.error, (errno, msg):
> if verbose:
> logit("Status check failed.")
> logit("Error #%s" % errno)
> logit(msg)
> sys.stderr.write("Status check failed.")
> sys.stderr.write("Error #%s: %s" % (errno,msg))
> sys.exit(1)
> # Back from status check - value should be in status var
> if response == SUCCESS:
> if switchnum == "":
> if verbose:
> logit("Status check successful. Port %s is %s" % (port,statusval))
> print "Status check successful. Port %s is %s" % (port,statusval)
> else:
> if verbose:
> logit("Status check successful. Port %s:%s is %s" % (switchnum, port,
> statusval))
> print "Status check successful. Port %s:%s is %s" % (switchnum, port,
> statusval)
>
> return statusval
> else:
> if verbose:
> logit("Status check failed, unknown reason.")
> sys.stderr.write("Status check failed, unknown reason.\n")
> sock.close()
> sys.exit(1)
>
> def return_status(buffer):
> global switchnum, port
>
> lines = buffer.splitlines()
>
> for i in lines:
> if i.find(CONTROL_CONSOLE) != (-1):
> return (NOT_COMPLETE, "1\r", "Status Unknown")
> elif i.find(DEVICE_MANAGER) != (-1):
> if switchnum != "":
> res = switchnum + "\r"
> else:
> if FIRMWARE_REV == 2:
> res = "3\r"
> elif FIRMWARE_REV == 3:
> res = "2\r1\r"
> else: #placeholder for future revisions
> res = "3\r"
> return (NOT_COMPLETE, res, "Status Unknown")
> elif i.find(OUTLET_CONTROL) != (-1):
> ls = buffer.splitlines()
> portval = port.strip()
> portval = " " + portval + " "
> portval2 = " " + port.strip() + "- "
> found_portval = False
> for l in ls:
> if l.find(portval) != (-1) or l.find(portval2) != (-1):
> found_portval = True
> linesplit = l.split()
> linelen = len(linesplit)
> return (COMPLETE,SUCCESS,linesplit[linelen - 1])
> elif i.find(MASTER) != (-1):
> try:
> e = int(port.strip())
> portval = port.strip()
> switchval = switchnum.strip()
> portval = switchval + ":" + portval
> except ValueError, e:
> portval = port.strip()
> ls = buffer.splitlines()
> found_portval = False
> for l in ls:
> words = l.split()
> if len(words) > 3:
> if words[2] == portval or words[3] == portval:
> found_portval = True
> linesplit = l.split()
> linelen = len(linesplit)
> return (COMPLETE, SUCCESS, linesplit[linelen - 3])
> return (COMPLETE, FAIL, "Incorrect port number")
> return (NOT_COMPLETE, chr(27), "Status Unknown")
>
> def do_power_switch(sock, status):
> result_code = 1
>
> while result_code:
> i, mo, txt = sock.expect(regex_list, TELNET_TIMEOUT)
> if i == CONTINUE_INDEX: # Capture the rest of the screen...
> sock.write("\r")
> ii,moo,txtt = sock.expect(regex_list, TELNET_TIMEOUT)
> txt = txt + txtt
>
> ndbuf = sock.read_eager() # Scoop up remainder
> if verbose:
> logit(txt + ndbuf)
>
> if status == "off":
> result_code, response = power_off(txt + ndbuf)
> elif status == "on":
> result_code, response = power_on(txt + ndbuf)
> else:
> if verbose:
> logit("Invalid status in do_power_switch() function")
> sys.stderr.write("Invalid status in do_power_switch() function")
> sys.exit(1)
>
> if result_code:
> try:
> sock.write(response)
> except socket.error, (errno, msg):
> if verbose:
> logit("Error #%s" % errno)
> logit(msg)
> sys.stderr.write("Error #%s: %s" % (errno,msg))
> sys.exit(1)
> # FIXME: always returns COMPLETE (0)
> else:
> try:
> sock.write(response)
> except socket.error, (errno, msg):
> if verbose:
> logit("Error #%s" % errno)
> logit(msg)
> sys.stderr.write("Error #%s: %s" % (errno,msg))
> sys.exit(1)
> return COMPLETE
>
>
> def power_switch(buffer, escape, control_outlet, control_outlet2):
> # If port is not aliased, then outlet control screen will have the word
> # 'Outlet' in the header. If the name is aliased, it will only have the
> # alias in the header.
>
> outlet_search_str1 = "Outlet " + port.strip() + " ------------"
> outlet_search_str2 = port.strip() + " ------------"
> outlet_search_str3 = "Outlet " + switchnum.strip() + ":" + port.strip() + "
> ------"
> outlet_search_str4 = " Outlet : " + port.strip()
> outlet_search_str5 = " Outlet Name : " + port.strip()
> master_search_str1 = "-------- Master"
> lines = buffer.splitlines()
>
> for i in lines:
> if i.find(CONTROL_CONSOLE) != (-1):
> return (NOT_COMPLETE,"1\r")
>
> elif i.find(DEVICE_MANAGER) != (-1):
> if switchnum != "":
> res = switchnum + "\r"
> else:
> if FIRMWARE_REV == 2:
> res = "3\r"
> elif FIRMWARE_REV == 3:
> #Changed for bz299191
> #res = "2\r1\r"
> res = "2\r"
> else: #placeholder for future revisions - sheesh
> res = "3\r"
> return (NOT_COMPLETE, res)
>
> elif (i.find(master_search_str1) != (-1)):
> return (NOT_COMPLETE, port.strip() + "\r")
>
> elif i.find(outlet_search_str1) != (-1) and (switchnum == ""):
> return (NOT_COMPLETE,"1\r")
>
> elif i.find(outlet_search_str2) != (-1) and (switchnum == ""):
> return (NOT_COMPLETE,"1\r")
>
> elif i.find(outlet_search_str3) != (-1):
> return (NOT_COMPLETE, "1\r")
>
> elif i == outlet_search_str4:
> return (NOT_COMPLETE, "1\r")
>
> elif i == outlet_search_str5:
> return (NOT_COMPLETE, "1\r")
>
> elif i.find(OUTLET_MANAGE) != (-1):
> #Changed for bz299191
> #return (NOT_COMPLETE, "\r")
> return (NOT_COMPLETE, "1\r")
>
> #elif i.find(OUTLET_CONTROL) != (-1) or i.find(OUTLET_MANAGE) != (-1):
> elif i.find(OUTLET_CONTROL) != (-1):
> ls = buffer.splitlines()
> portval = port.strip()
> portval = " " + portval + " "
> found_portval = False
> i = 0
> # look for aliased name
> for l in ls:
> i = i + 1
> if l.find(portval) != (-1):
> found_portval = True
> linesplit = l.split()
> outlet_str = linesplit[0]
> dex = outlet_str.find("-")
> if dex <= (0):
> if verbose:
> logit("Problem identifying outlet\n")
> logit("Looking for %s in string %s\n" % (portval,outlet_str))
> sys.stderr.write("Problem identifying outlet\n")
> sys.stderr.write("Looking for %s in string %s\n" %
> (portval,outlet_str))
> sys.exit(1)
> normalized_outlet_str = outlet_str[:dex]
> return (NOT_COMPLETE, normalized_outlet_str + "\r")
> # look for portnum
> portval = " " + port.strip() + "-"
> i = 0
> for l in ls:
> i = i + 1
> if l.find(portval) != (-1):
> found_portval = True
> linesplit = l.split()
> outlet_str = linesplit[0]
> dex = outlet_str.find("-")
> if dex <= (0):
> if verbose:
> logit("Problem identifying outlet\n")
> logit("Looking for %s in string %s\n" % (portval,outlet_str))
> sys.stderr.write("Problem identifying outlet\n")
> sys.stderr.write("Looking for %s in string %s\n" %
> (portval,outlet_str))
> sys.exit(1)
> normalized_outlet_str = outlet_str[:dex]
> return (NOT_COMPLETE, normalized_outlet_str + "\r")
> if found_portval == False:
> if verbose:
> logit("Problem identifying outlet\n")
> logit("Looking for '%s' in string '%s'\n" % (portval, ls))
> sys.stderr.write("Problem identifying outlet\n")
> sys.stderr.write("Looking for '%s' in string '%s'\n" % (portval, ls))
> sys.exit(1)
>
> elif i.find(MASTER) != (-1):
> ls = buffer.splitlines()
> found_portval = False
> # look for aliased name
> portval = port.strip()
> for l in ls:
> words = l.strip().split()
> if len(words) > 3:
> if '----' not in words[0] and words[3].strip() == portval:
> outlet_str = words[0]
> dex = outlet_str.find("-")
> if dex <= (0):
> if verbose:
> logit("Problem identifying outlet\n")
> logit("Looking for %s in string %s\n" % (portval, outlet_str))
> sys.stderr.write("Problem identifying outlet\n")
> sys.stderr.write("Looking for %s in string %s\n" % (portval,
> outlet_str))
> sys.exit(1)
> normalized_outlet_str = outlet_str[:dex]
> return (NOT_COMPLETE, (normalized_outlet_str + "\r"))
> # look for portnum
> portval = port.strip()
> portval = switchnum.strip() + ":" + portval + " "
> i = 0
> for l in ls:
> i = i + 1
> if l.find(portval) != (-1):
> found_portval = True
> linesplit = l.split()
> outlet_str = linesplit[0]
> dex = outlet_str.find("-")
> if dex <= (0):
> if verbose:
> logit("Problem identifying outlet\n")
> logit("Looking for %s in string %s\n" % (portval,outlet_str))
> sys.stderr.write("Problem identifying outlet\n")
> sys.stderr.write("Looking for %s in string %s\n" %
> (portval,outlet_str))
> sys.exit(1)
> normalized_outlet_str = outlet_str[:dex]
> return (NOT_COMPLETE, (normalized_outlet_str + "\r"))
> if found_portval == False:
> if verbose:
> logit("Problem identifying outlet\n")
> logit("Looking for '%s' in string '%s'\n" % (portval, ls))
> sys.stderr.write("Problem identifying outlet\n")
> sys.stderr.write("Looking for '%s' in string '%s'\n" % (portval, ls))
> sys.exit(1)
>
> elif i.find(CONFIRM) != (-1):
> return (NOT_COMPLETE,"YES\r")
>
> elif i.find(COMMAND_SUCCESS) != (-1):
> return (COMPLETE,"\r")
>
> elif i.find(COMMAND_SUCCESS_2) != (-1):
> return (COMPLETE,"\r")
>
> elif i.find(CONTROL_OUTLET) != (-1):
> return (NOT_COMPLETE, control_outlet + "\r")
>
> elif i.find(CONTROL_OUTLET_2) != (-1):
> return (NOT_COMPLETE, control_outlet2 + "\r")
>
> if (escape == True):
> return (NOT_COMPLETE, chr(27))
> else:
> raise "unknown screen encountered in \n" + str(lines) + "\n"
>
> def do_power_off(sock):
> x = do_power_switch(sock, "off")
> return x
>
> def power_off(buffer):
> x = power_switch(buffer, False, "2", "3");
> return x
>
> def do_power_on(sock):
> x = do_power_switch(sock, "on")
> return x
>
> def power_on(buffer):
> x = power_switch(buffer, True, "1", "1");
> return x
>
> if __name__ == "__main__":
> main()
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster
--
Josh Gray
Systems Administrator
NIC, Inc
Email: jgray@xxxxxxxxxx
Desk/Mobile: 913-221-1520
"Talent is cheaper than table salt.
What separates the talented individual
from the successful one is a lot of hard work."
- Stephen King
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
