> I used a generic script resource instead of the supplied Postgres-8. It > didn't seem to work, but then we needed 2 of them and not 1. > > If you're using the init script, try using it as a script resource > instead. > > brad@xxxxxxxxxxxxxx wrote: >> I am attempting to set up an active/passive failover environment for >> postgresql-8.2. I created a failover domain with 2 nodes, one of them >> preferred, added a postgresql-8 resource and an IP address resource. >> Now >> when I set up a service I run into problems. The idea is to have both >> the >> postgresql-8 resource and the IP address resource within the service so >> that it will move the floating IP to the other node in the domain and >> start postgres on it. The IP portion seems to work fine but postgresql >> always fails. I get these error messages: >> >> Aug 14 15:40:47 cdb6 clurgmgrd[4106]: <notice> Starting disabled service >> 10.10.1.221 >> Aug 14 15:40:47 cdb6 clurgmgrd: [4106]: <info> Adding IPv4 address >> 10.10.1.236 to bond0 >> Aug 14 15:40:48 cdb6 clurgmgrd: [4106]: <info> Starting Service >> postgres-8:cdb6 >> Aug 14 15:40:48 cdb6 clurgmgrd: [4106]: <err> Starting Service >> postgres-8:cdb6 > Failed >> Aug 14 15:40:48 cdb6 clurgmgrd[4106]: <notice> start on postgres-8:cdb6 >> returned 1 (generic error) >> Aug 14 15:40:48 cdb6 clurgmgrd[4106]: <warning> #68: Failed to start >> 10.10.1.221; return value: 1 >> Aug 14 15:40:48 cdb6 clurgmgrd[4106]: <notice> Stopping service >> 10.10.1.221 >> Aug 14 15:40:48 cdb6 clurgmgrd: [4106]: <info> Stopping Service >> postgres-8:cdb6 >> Aug 14 15:40:48 cdb6 clurgmgrd: [4106]: <err> Checking Existence Of File >> /var/run/cluster/postgres-8/postgres-8:cdb6.pid [postgres-8:cdb6] > >> Failed >> - File Doesn't Exist >> Aug 14 15:40:48 cdb6 clurgmgrd: [4106]: <err> Stopping Service >> postgres-8:cdb6 > Failed >> Aug 14 15:40:48 cdb6 clurgmgrd[4106]: <notice> stop on postgres-8:cdb6 >> returned 1 (generic error) >> Aug 14 15:40:48 cdb6 clurgmgrd[4106]: <crit> #12: RG 10.10.1.221 failed >> to >> stop; intervention required >> Aug 14 15:40:48 cdb6 clurgmgrd[4106]: <notice> Service 10.10.1.221 is >> failed >> Aug 14 15:40:48 cdb6 clurgmgrd[4106]: <crit> #13: Service 10.10.1.221 >> failed to stop cleanly >> >> >> Here are the relavent portions of cluster.conf: >> >> <failoverdomains> >> <failoverdomain name="cdb6_pgsql" ordered="1" >> restricted="1"> >> <failoverdomainnode name="cdb6" >> priority="1"/> >> <failoverdomainnode name="cdb5" >> priority="2"/> >> </failoverdomain> >> </failoverdomains> >> <resources> >> <clusterfs device="/dev/mapper/gfsvol1" >> force_unmount="0" fsid="36155" fstype="gfs" >> mountpoint="/mnt/gfs" name="gfs1" options=""/> >> <postgres-8 >> config_file="/var/lib/pgsql/data/postgresql.conf" >> name="cdb6" postmaster_options="" >> postmaster_user="postgres" shutdown_wait=""/> >> <ip address="10.10.1.236" monitor_link="1"/> >> <script file="/etc/rc.d/init.d/postgresql" >> name="postgres"/> >> </resources> >> <service autostart="0" domain="cdb6_pgsql" >> name="10.10.1.221" recovery="relocate"> >> <ip ref="10.10.1.236"/> >> <postgres-8 ref="cdb6"/> >> </service> >> >> I looked into the init script failing to return zero issue and I don't >> think that is it. My postgresql startup script doesn't even show that >> there was an attempt to start it. When setting up a postgresql-8 >> resource >> I assume that 'config file' is the config file for postgres or is it the >> startup script '/etc/rc.d/init.d/postgresql'? Neither works for me. >> >> Any tips would be greatly appreciated. >> >> Brad Crotchett > I tried that as well and it still fails. Does rgmanager already know to use start|stop|restart with the init script? Thanks, Brad Crotchett brad@xxxxxxxxxxxxxx http://www.bradandkim.net -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
