Dear list members, If I understand well, here are the steps I have to follow to configure a fence device that will use SUN ILOM interface : 1. Ensure that OpenIPMI and OpenIPMI-tools packages are installed on the cluster nodes. 2. With system-config-cluster tool, add a new fence device of type "IPMI Lan". Fill the form with the ILOM IP address, the name of the administrator user and his password. Then associate the fence device with the cluster node. 3. Repeat the step above for the SUN ILOM interface of each node. 4. Send the new configuration to the cluster 5. That's all and everything will be handle correctly by the cluster. Am I ok? Best regards __________________ Stephanie Lanthier Analyste de l'informatique Universite du Quebec a Montreal Service de l'informatique et des telecommunications lanthier.stephanie@xxxxxxx Téléphone : 514-987-3000 poste 6106 Bureau : PK-M535 ------------------------------ Message: 13 Date: Fri, 10 Aug 2007 14:21:31 -0500 (CDT) From: brad@xxxxxxxxxxxxxx Subject: Re: Add a fence device of type SUN ILOM To: "linux clustering" <linux-cluster@xxxxxxxxxx> Message-ID: <56032.129.237.174.144.1186773691.squirrel@xxxxxxxxxxxxxxxxxxxxxx> Content-Type: text/plain;charset=iso-8859-1 > brad@xxxxxxxxxxxxxx wrote: > >>>brad@xxxxxxxxxxxxxx wrote: >>> >>> >>>>>Quentin Arce wrote: >>>>> >>>>> >>>>> >>>>> >>>>>>>>My machines are SUN Fire X4100. I see that we can define a fence >>>>>>>>device of type HP ILO. I would like to know if I can use the HP ILO >>>>>>>>form in system-config-cluster tool to enter and use a SUN ILOM as >>>>>>>>fence device? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>How does ILOM work? telnet or ssh? Is there an snmp interface to >>>>>>>ILOM? >>>>>>>If so, there might be a way...by hacking on another agent. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>So, I'm a lurker on this list as I no longer have a cluster up... but >>>>>>I work on ILOM and I would love to see this work. This isn't >>>>>> official >>>>>>support, I'm a developer not a customer support person. So, it's >>>>>> more >>>>>>on my time. If there is anything I can do... Please let me know. >>>>>>Questions on this problem, regarding what ILOM can / can't do, how to >>>>>>check state of the server via ILOM, etc. >>>>>> >>>>>> >>>>>> >>>>>Quentin! That is very kind of you. If you help with the ILOM protocol, >>>>>I'll help with the agent/script. This thread could form a document on >>>>>how to write an arbitrary fence agent for use with rhcs. >>>>> >>>>>Where is documentation available? Generally, three things are needed >>>>>from a baseboard management device in order to use it for fencing: 1) >>>>> A >>>>>way to shut the system down, 2) a way to power the system up, and 3) a >>>>>way to check if it is up or down. >>>>> >>>>>What means can a script use to communicate with the ILOM card? Are >>>>>there >>>>>big delta's in the protocol between different ILOM versions? >>>>> >>>>>I look forward to hearing from you. >>>>> >>>>>-J >>>>> >>>>> >>>>> >>>>I am interested in seeing this thread play out as well since I have 26 >>>>SUN >>>>servers I am beginning to cluster. My question is why use SNMP over >>>>IPMI >>>>v2.0. I can do the above three things with: >>>> >>>>/usr/bin/ipmitool -U <user> -P <password> -H <ilom IP> chassis power >>>> off >>>>/usr/bin/ipmitool -U <user> -P <password> -H <ilom IP> chassis power on >>>>/usr/bin/ipmitool -U <user> -P <password> -H <ilom IP> chassis power >>>>status >>>> >>>>I don't need any MIB's for this either. It seems to me this might be >>>> an >>>>easier solution than snmp, but I may be missing something. >>>> >>>> >>>> >>>> >>>Oh make sure you are using lanplus mode for this. >>> >>> >>> >> >>Will do, and thanks. >> >> > That is a nice solution. There is a fence_ipmilan agent in the red hat > cluster distibution...how are you invoking the above for fencing? To > check if the rh agent works, here is the command line you would use (it > installs into /sbin...): > > /sbin/fence_ipmilan -a <ilom IP> -l <user> -p <password> -P -o > [off,on,reboot,status] > > There is a man page for fence_ipmilan that details some extra params. > > Well, I guess that solves the issue...if anyone would use an snmp-based > ILOM agent, we could talk about how to construct that...otherwise, so > much for my idea of this thread being instructions for creating > arbitrary agents! ;) > > -J > I just tested it and it seems to work perfectly. Sorry for bringing the thread to a premature end :) Brad Crotchett brad@xxxxxxxxxxxxxx http://www.bradandkim.net -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
