Thanks for the heads-up - I figured that out while playing around with
the setup.
Aravind.
jparsons@xxxxxxxxxx wrote:
Aravind Parchuri wrote:
We have a couple of nodes with redundant power supplies and two APC
7900 power switches that we need to connect them to. I can do ccs_tool
addfence to add both switches to the cluster.conf file, but is there
any way to specify both switches for each node, from the command line?
Thanks in advance.
Aravind.
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
Not that I know, but make certain that you use the 'option' attribute to
make certain both power supplies are off, before they are turned on
again. The default behavior is reboot, and it is possible for both
supplies to never be off at the same time - hence the machine is never
rebooted
In the cluster.conf file, it would look like this:
<clusternode name="node1">
<fence>
<method name="1">
<device name="my_apc" port="1" option="Off"/>
<device name="my_apc" port="2" option="Off"/>
<device name="my_apc" port="1" option="On"/>
<device name="my_apc" port="2" option="On"/>
</method>
</fence>
</clusternode>
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster