Hi,
I wanted to try out gfs2 instead of ocfs2 because of the acl's that it
supports, but I do not get it running. I am on openSUSE 10.2, x86_64.
my kernel is
Linux srv4 2.6.20.15-default #1 SMP Fri Jul 13 12:44:51 CEST 2007 x86_64
x86_64 x86_64 GNU/Linux
I have openais rpm's created from source rpm's:
openais-devel-0.80.1-6
openais-0.80.1-6
and I use cluster-2.00.00, just compiled from source. My *.lcrso files are
in /usr/lib64/lcrso/ and /usr/libexec/lcrso/. The LD_LIBRARY_PATH and the
PATH variable have both pathes included.
when I start /etc/init.d/cman then I see the following:
/etc/init.d/cman start
Starting cluster:
Loading modules... done
Mounting configfs... done
Starting ccsd... done
Starting cman... failed
/usr/sbin/cman_tool: aisexec daemon didn't start
/etc/init.d/cman: line 413: failure: command not found
and this is /var/log/messages:
Jul 16 15:10:00 srv4 ccsd[23855]: Starting ccsd 2.00.00:
Jul 16 15:10:00 srv4 ccsd[23855]: Built: Jul 13 2007 13:24:27
Jul 16 15:10:00 srv4 ccsd[23855]: Copyright (C) Red Hat, Inc. 2004 All
rights reserved.
Jul 16 15:10:00 srv4 ccsd[23855]: cluster.conf (cluster name = correo,
version = 1) found.
Jul 16 15:10:01 srv4 aisexec: [MAIN ] AIS Executive Service RELEASE 'subrev
1204 version 0.80.1'
Jul 16 15:10:01 srv4 aisexec: [MAIN ] Copyright (C) 2002-2006 MontaVista
Software, Inc and contributors.
Jul 16 15:10:01 srv4 aisexec: [MAIN ] Copyright (C) 2006 Red Hat, Inc.
Jul 16 15:10:01 srv4 aisexec: [MAIN ] AIS Executive couldn't open
configuration object database component.
Jul 16 15:10:01 srv4 aisexec: [MAIN ] AIS Executive exiting (-13).
When I run cman_tool -w join manually, the same happens, when I run it
within strace, I see it trying sometimes to connect to the
socket /var/run/cman_admin, and then it fails, because the socket is not
there.
I can start aisexec, but it does not create sockets /var/run/cman_client
and /var/run/cman_admin.
below my cluster.conf file:
<?xml version="1.0"?>
<cluster name="correo" config_version="1">
<cman two_node="1" expected_votes="1">
</cman>
<clusternodes>
<clusternode name="srv4" votes="1">
<fence>
<method name="single">
<device name="ilo_srv4"/>
</method>
</fence>
</clusternode>
<clusternode name="srv5" votes="1">
<fence>
<method name="single">
<device name="ilo_srv5"/>
</method>
</fence>
</clusternode>
</clusternodes>
<fencedevices>
<fencedevice name="ilo_srv4" agent="fence_ilo"
ipaddr="192.168.9.180" login="ilo" />
<fencedevice name="ilo_srv5" agent="fence_ilo"
ipaddr="192.168.9.181" login="ilo" />
</fencedevices>
</cluster>
and my openais.conf file:
# Please read the openais.conf.5 manual page
totem {
version: 2
secauth: off
interface {
bindnetaddr: 192.168.8.0
mcastaddr: 226.94.1.1
mcastport: 5405
}
}
logging {
debug: on
timestamp: on
}
amf {
mode: disabled
}
any hint what my problem is, and how to get the cman running?
kind regards
Sebastian
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
