My secondary fencing device is and APC Power Switch APC7921. This is not a Masterswitch plus so there are two APC7921's, one for each POwer supply. When testing the the device using the following command:
fence_apc -a 10.179.20.52 -l apc -p apc -n 4 -v
I get:
failed: unrecognised menu response
Here;s is the output from the /tmp/apclog.txt
*****************************************************************************************************************
User Name : apc
Password : ***
American Power Conversion Network Management Card AOS v2.7.0
(c) Copyright 2004 All Rights Reserved Rack PDU APP v2.7.3
-------------------------------------------------------------------------------
Name : RackPDU Date : 10/24/2000
Contact : Unknown Time : 11:45:43
Location : Unknown User : Administrator
Up Time : 64 Days 0 Hours 51 Minutes Stat : P+ N+ A+
Switched Rack PDU: Communication Established
------- Control Console -------------------------------------------------------
1- Device Manager
2- Network
3- System
4- Logout
<ESC>- Main Menu, <ENTER>- Refresh, <CTRL-L>- Event Log
>
------- Control Console -------------------------------------------------------
1- Device Manager
2- Network
3- System
4- Logout
<ESC>- Main Menu, <ENTER>- Refresh, <CTRL-L>- Event Log
>
American Power Conversion Network Management Card AOS v2.7.0
(c) Copyright 2004 All Rights Reserved Rack PDU APP v2.7.3
-------------------------------------------------------------------------------
Name : RackPDU Date : 10/24/2000
Contact : Unknown Time : 11:45:43
Location : Unknown User : Administrator
Up Time : 64 Days 0 Hours 51 Minutes Stat : P+ N+ A+
Switched Rack PDU: Communication Established
------- Control Console -------------------------------------------------------
1- Device Manager
2- Network
3- System
4- Logout
<ESC>- Main Menu, <ENTER>- Refresh, <CTRL-L>- Event Log
>
------- Control Console -------------------------------------------------------
1- Device Manager
2- Network
3- System
4- Logout
<ESC>- Main Menu, <ENTER>- Refresh, <CTRL-L>- Event Log
> 1
------- Device Manager --------------------------------------------------------
1- Phase Monitor/Configuration
2- Outlet Restriction Configuration
3- Outlet Control/Configuration
4- Power Supply Status
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
> 3
------- Outlet Control/Configuration ------------------------------------------
1- leoukpdb4 ON
2- leoukldb4 ON
3- leoukpdb3 ON
4- leoukldb3 ON
5- leoukpdb2 ON
6- leoukldb2 ON
7- leoukpdb1 ON
8- leoukldb1 ON
9- Master Control/Configuration
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
>
------- Outlet Control/Configuration ------------------------------------------
1- leoukpdb4 ON
2- leoukldb4 ON
3- leoukpdb3 ON
4- leoukldb3 ON
5- leoukpdb2 ON
6- leoukldb2 ON
7- leoukpdb1 ON
8- leoukldb1 ON
9- Master Control/Configuration
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
>
------- Device Manager --------------------------------------------------------
1- Phase Monitor/Configuration
2- Outlet Restriction Configuration
3- Outlet Control/Configuration
4- Power Supply Status
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
>
------- Control Console -------------------------------------------------------
1- Device Manager
2- Network
3- System
4- Logout
<ESC>- Main Menu, <ENTER>- Refresh, <CTRL-L>- Event Log
*****************************************************************************************************************
Has anybody else had problem with the APC7921. I am going to assume it's because the APC want the telnet session to type 'YES' to confirm.
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
