Thanks David & Robert.
Actually the real problem I have is that I can not
stop "active subsystems", so I use this command to
check what services are running.
For example, first of all, I run cman_tool status:
node04:/etc/init.d# cman_tool status
Protocol version: 5.0.1
Config version: 8
Cluster name: cluster01
Cluster ID: 730
Cluster Member: Yes
Membership state: Cluster-Member
Nodes: 3
Expected_votes: 4
Total_votes: 3
Quorum: 3
Active subsystems: 2
Node name: node04
Node ID: 1
Node addresses: 10.10.10.4
In which it tells us 2 active subsystems:
hostname:/etc/init.d# cman_tool services
Service Name GID
LID State Code
Fence Domain: "default" 5
2 join S-6,20,1
[1]
User: "usrm::manager" 3
3 join S-8,40,2
[2 1]
Using clustat -x to confirm:
node04:/etc/init.d# clustat -x
Timed out waiting for a response from Resource Group
Manager
<?xml version="1.0"?>
<clustat version="4.1.1">
<quorum quorate="1" groupmember="1"/>
<nodes>
<node name="node03" state="1" local="0"
estranged="0" rgmanager="1"
nodeid="0x0000000000000002"/>
<node name="node01" state="1" local="0"
estranged="0" rgmanager="0"
nodeid="0x0000000000000003"/>
<node name="node02" state="0" local="0"
estranged="0" rgmanager="0"
nodeid="0x0000000000000000"/>
<node name="node04" state="1" local="1"
estranged="0" rgmanager="1"
nodeid="0x0000000000000001"/>
</nodes>
</clustat>
Check rgmanager status:
node04:/etc/init.d# rgmanager status
clurgmgrd (pid 4755 4754) is running...
Then try to stop it:
node04:/etc/init.d# rgmanager stop
Shutting down cluster Servie Manager...
Waiting for service to stop:
but looks it is waiting for the service to stop
forever.
I tried to stop fenced.
node04:/etc/init.d#./fenced status
fenced (pid 3913) is running...
node04:/etc/init.d#./fenced stop
Stopping fence domain: [ OK ]
node04:/etc/init.d#./fenced status
fenced (pid 3913) is running...
Seems fenced did not stop fenced properly, although it
told us [ OK ].
Any sequence I did is wrong? Just got confused ?
Any hint is very appreciated.
Siman
--- David Teigland <teigland@xxxxxxxxxx> wrote:
> On Mon, Feb 19, 2007 at 06:49:05AM -0800, Siman Hew
> wrote:
> > Hello,
> >
> > When I try to check the services in a cluster, I
> am
> > using "cman_tool services", what I get is
> something
> > like this:
> ......
> Now, on to your specific problem. By the looks of
> it I'd say that your
> machine is trying to fence someone.
> /var/log/messages will usually have
> some clear information about what's wrong. Source
> code debugging using
> the info above is probably the wrong place to start.
>
> Dave
>
>
____________________________________________________________________________________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
