On Wed, 2007-01-24 at 18:19 +0100, Jos Vos wrote: > On Wed, Jan 24, 2007 at 11:39:52AM -0500, Lon Hohberger wrote: > > > I've seen abysmal performance in some megaraid+jbod configurations (e.g. > > 50+ seconds to get 2 block reads and 2 block writes on RHEL2.1), but > > I've never seen corruption like what you're describing. Of course, it's > > been almost 4 years since I used a host-RAID configuration, and I > > haven't ever used one with GFS... ;( > > Correction: I'm *not* using host-RAID. The cabinet does the RAID > internally (configured via network interface) and is just a SAN > (the LV's on the cabinet show up as disks) for the connected hosts > and the LSI 22320R is only used as an "ordinary" SCSI controller. > > I'm using the MPT Fusion (mpt*) driver. Argh, I got my wires crossed with another email I read concerning PV220S + megaraid. Forget I said anything :) I don't have any experience with your hardware :( -- Lon -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
