Does this output make any sense to anyone? Storage shows up under the adapter but not the scsi devices noe fdisk? Yet it shows up on fdisk on another node? I'm VERY confused here :). # cat /proc/scsi/scsi Attached devices: ]# cat /proc/scsi/qla2xxx/0|more QLogic PCI to Fibre Channel Host Adapter for QLA22xx: Firmware version 2.02.08 TP, Driver version 8.01.04-d7 ISP: ISP2200, Serial# C57427 Request Queue = 0x1f400000, Response Queue = 0x1782000 Request Queue count = 2048, Response Queue count = 64 Total number of active commands = 0 Total number of interrupts = 2932 Device queue depth = 0x10 Number of free request entries = 2039 Number of mailbox timeouts = 0 Number of ISP aborts = 0 Number of loop resyncs = 0 Number of retries for empty slots = 0 Number of reqs in pending_q= 0, retry_q= 0, done_q= 0, scsi_retry_q= 0 Host adapter:loop state = <READY>, flags = 0x883 Dpc flags = 0x4000000 MBX flags = 0x0 Link down Timeout = 000 Port down retry = 008 Login retry count = 008 Commands retried with dropped frame(s) = 0 Product ID = 4953 5020 2020 0001 SCSI Device Information: scsi-qla0-adapter-node=200000e08b0393ed; scsi-qla0-adapter-port=210000e08b0393ed; scsi-qla0-target-0=23000080e512699a; scsi-qla0-target-1=21000080e511feb0; scsi-qla0-target-2=100000e00221fd57; scsi-qla0-target-3=21000cc001000c8d; FC Port Information: scsi-qla0-port-0=200000e08b01099c:210000e08b01099c:6a1200:81; scsi-qla0-port-1=200000e08b054e4f:210000e08b054e4f:6a1300:4; scsi-qla0-port-2=200000e08b0c4d02:210000e08b0c4d02:6a1400:82; scsi-qla0-port-3=200000e08b081bd7:210000e08b081bd7:6a1500:83; scsi-qla0-port-4=200000e08b038fed:210000e08b038fed:6a1600:84; scsi-qla0-port-5=200000e08b083ed7:210000e08b083ed7:6a1700:85; scsi-qla0-port-6=200000e08b0395ed:210000e08b0395ed:6a1800:86; scsi-qla0-port-7=200000e08b0394ed:210000e08b0394ed:6a1900:87; scsi-qla0-port-8=200000e08b00caec:210000e08b00caec:6a1a00:88; scsi-qla0-port-9=20000080e512699a:23000080e512699a:6a1cef:89; scsi-qla0-port-10=200000e08b0832d7:210000e08b0832d7:6a1d00:8a; scsi-qla0-port-11=20000080e511feb0:21000080e511feb0:6a1eef:8b; scsi-qla0-port-12=100000e00201fd57:100000e00221fd57:6a1f00:8c; scsi-qla0-port-13=200000e08b0843d7:210000e08b0843d7:691400:6; scsi-qla0-port-14=200000e08b19b178:210000e08b19b178:691500:5; scsi-qla0-port-15=200000e08b078f24:210000e08b078f24:691600:8e; scsi-qla0-port-16=200000e08b038eed:210000e08b038eed:691700:7; scsi-qla0-port-17=50050cc001000c8d:21000cc001000c8d:691ddc:8f; SCSI LUN Information: (Id:Lun) * - indicates lun is not registered with the OS. ( 0: 0): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:89 00 ( 0: 1): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:89 00 ( 0: 2): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:89 00 ( 1: 0): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:8b 00 ( 1: 1): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:8b 00 ( 1: 2): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:8b 00 ( 2: 0): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:8c 00 ( 2: 1): Total reqs 0, Pending reqs 0, flags 0x0, 0:0:8c 0c ( 3: 0): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:8f 00 # fdisk -l Disk /dev/hda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 4767 38290896 83 Linux /dev/hda2 4768 4865 787185 82 Linux swap -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster