Hi all, On a 2 node openais cman cluster, I failed a network interface and noticed that it didn't failed over the other node. Looking at the rgmanager-2.0.16 code I noticed that: handle_relocate_req is called with preferred_target = -1, but inside this function, there are 2 checks to see if the preferred_target is setted, the check is a 'if (preferred_target != 0)' so the function thinks that a preferred target is choosed. Then, inside the cycle, the only one target that really exists is "me" (as -1 isn't a real target) and there a "goto exausted:", the service is then restarted only on the locale node, where it fails again and so it's stopped. Changing these checks to "> 0" worked. Before writing a patch I noticed that in the RHEL4 CVS tag is used a NODE_ID_NONE instead of the numeric values, so the problem (not tested) probably doesn't happen. Is it probably a forgotten patch on HEAD and RHEL5? The same problem is in the ip.sh resource scripts as it's missing the patch for "Fix bug in ip.sh allowing start of the IP if the link was down, preventing failover (linux-cluster reported)." in 1.5.2.16 of RHEL4 branch. Thanks! Bye! -- Simone Gotti -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Video-Corsi.com : Vuoi scoprire un modo rapido e veloce per imparare? Scopri i nostri VideoCorsi professionali Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=5141&d=12-1 -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
