If this is the same problem I was having, it was a simple fix. Here is a paste on a reply to my own question. isplist@xxxxxxxxxxxx wrote: > # mount -t gfs /dev/rimfire/rimfire /gfs/rimfire/ > mount: File exists > > Why is it that I can only mount one at a time? I need at least two per node, > non contiguous, separate. > > Mike > Hi Mike, I'm guessing that maybe you gave them the same locking table on gfs_mkfs, and they're supposed to be different. When you did mkfs, did you use the same -t cluster:fsname for more than one? You can find this out by doing: gfs_tool sb /dev/rimfire/rimfire table gfs_tool sb /dev/storec/web table gfs_tool sb /dev/storeb/qm table And see if the same value appears. You can change it after the mkfs has already been done with this command: gfs_tool sb /dev/<device> table cluster:new_name Regards, Bob Peterson Red Hat Cluster Suite On Tue, 19 Dec 2006 10:36:20 +0100, aleava@xxxxxxxxx wrote: > Hi, > > I try to repost my old question: I want to mount more than one logical > volume from our 2 servers (nodes). > The first attempt I did was with two server and one logical volume, and it > worked; then I tried with two logical volumes and I can mount the partition > from one server, while on the other one the "mount" command hangs, and I > have to reset both the machines. > > My configuration is the following: > - Two servers with Red Hat Enterprise 4 Update 1 (kernel 2.6.9-11.EL); > - Disk Array Dot Hill with HBA Qlogic 2340; > - GFS downloaded from CVS, RHEL4 branch. > > Here, my updated cluster.conf > > <?xml version="1.0"?> > <cluster config_version="6" name="GFS"> > <fence_daemon post_fail_delay="0" post_join_delay="3"/> > <clusternodes> > <clusternode name="recorder" votes="1" nodeid="1"> > <fence> > <method name="1"> > <device name="Manual_Fencing" nodename="recorder"/> > </method> > </fence> > </clusternode> > <clusternode name="data_server" votes="1" nodeid="2"> > <fence> > <method name="1"> > <device name="Manual_Fencing" nodename="data_server"/> > </method> > </fence> > </clusternode> > </clusternodes> > <cman expected_votes="1" two_node="1"/> > <fencedevices> > <fencedevice agent="fence_manual" name="Manual_Fencing"/> > </fencedevices> > <rm> > <failoverdomains> > <failoverdomain name="Failover_Domain" ordered="0" restricted="1"> > <failoverdomainnode name="recorder" priority="1"/> > <failoverdomainnode name="data_server" priority="1"/> > </failoverdomain> > </failoverdomains> > <resources/> > </rm> > </cluster> > > Thanks in advance > Ale > > > ------------------------------------------------------ > Passa a Infostrada. ADSL e Telefono senza limiti e senza canone Telecom > http://click.libero.it/infostrada19dic06 > > > -- > Linux-cluster mailing list > Linux-cluster@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/linux-cluster -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
