It's been a while since I posted for help so I decided to make the job easier than originally posted. All I need are two things.... 1: Look at and fix up (if needed) my cluster.conf file so that when a node crashes, it does not take down the whole cluster. I'm using Brocade switches which seem to work fine when I can shut a node down properly but if it crashes for any reason, it takes down the cluster. I suspect my GFS/Cluster shut down commands are part of the problem. 2: Configure one LVS server, working with one web server. I'll do the secondary later, I just need the initial one working so that I can learn and follow that example. The server is built and running but I've never dealt with dual NIC's which I think is where my problems are. Both LVS and web server have dual NICs. I can give you the IP's of the machines and you can either build me the LVS config and notes on what I'll need to do or if you have a fixed IP, I can let you into the LVS and web server. You can then set it up and I'll learn from that example. I am more than willing to pay someone for this since I need this asap. I've been trying to figure out this part for weeks and am floored on why something this simple I have yet to get working. I was very close but kept having problems. Thank you very much for your help in this. Mike -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
