On Thu, Nov 02, 2006 at 02:56:44PM -0600, Greg Swift wrote:
> the first box starts gfs2 just fine, second won't, it hangs at this
> (from var/log/messages):
>
> Nov 1 22:41:07 box2 kernel: audit(1162442467.427:150): avc: denied {
> connectto } for pid=3724 comm="mount.gfs2"
> path=006766735F636F6E74726F6C645F736F6$
> Nov 1 22:41:07 box2 kernel: GFS2: fsid=: Trying to join cluster
> "lock_dlm", "outMail:data"
> Nov 1 22:41:07 box2 kernel: audit(1162442467.451:151): avc: denied {
> search } for pid=3724 comm="mount.gfs2" name="dlm" dev=debugfs ino=13186
> scontext$
> Nov 1 22:41:07 box2 kernel: dlm: data: recover 1
> Nov 1 22:41:07 box2 kernel: GFS2: fsid=outMail:data.1: Joined cluster.
> Now mounting FS...
> Nov 1 22:41:07 box2 kernel: dlm: data: add member 1
> Nov 1 22:41:07 box2 kernel: dlm: data: add member 2
> Nov 1 22:49:07 box2 gfs_controld[3639]: mount: failed -17
>
>
> Remember it is set to permissive.
>
> So I shut down the box that came up fine on its own, manually enabled
> the services on box2 (the box that wasnt coming up) and it works fine.
> Turned on the box1, and at boot it is hanging at the same place box2 was.
>
> I also realize that a 2 node cluster is not prefered, but its what i'm
> setting up, what i have access to at the moment, and honestly i'm not
> sure that i believe a 3rd box would help (but it might).
A couple things about your cluster.conf
1. You probably want to set a post_join_delay of around 10 to avoid
fencing at startup time. e.g.
<fence_daemon post_join_delay="10">
</fence_daemon>
2. It's "fencedevices" and "fencedevice", no "_".
With both machines in a clean/reset state, do service cman start on both,
then start clvmd on both, then _before_ doing anything with gfs, check the
status; on both nodes run:
$ cman_tool status
$ cman_tool nodes
$ group_tool -v
then do "mount -v /dev/foo /dir" on one node
then do group_tool -v on that node
then do "mount -v /dev/foo /dir" on the other node
then do group_tool -v on _both_ nodes
Send the output of all that and we'll try to see where things are going
off track.
Dave
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
