On Thu, 2006-11-02 at 08:58 -0500, FM wrote: > Hello, > With RHEL 4.4 CS : > My director : HP DL360 (TG3 RH module), 2 Gb NIC (bonding mode=0) behind > a PIX firewall (100 Mb NIC). All servers connected to Gb CISCO switches > > I'm having a hard time with this server. the LVS seems to be ok (web > sites are available for users ;) ). But, in the logs, I have a lot of > nanny disabling real servers and then enabling them 1 second later. And > when connecting using SSH, I have a connection time out or when the > connection succeed, the ssh session freezes after several minutes. I > talked to CISCO admin and traffic is not crazy in the director ports. > > I read in the past that the TG3 is not recommended by HP. Do you have > that kind of issue with the mix hp broadcom NIC + tg3 RH module ? Hi, I haven't experienced the same problem, but occasionally, my tg3 boxes don't acquire their DHCP addresses on boot because the link is (reportedly) not detected. At this point, I have to log in via remote console and manually try to bring up the interface (sometimes it takes 2-3 tries). Also, sometimes shell sessions pause for 3-5 seconds for no good reason. I haven't bothered to trace the problem further, because for me, it's just a minor annoyance. Maybe it's related? *shrug* -- Lon -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
