Right, yes, I do have such software but there is no SDK or anything that I know of that would allow external control. And, the software would not lend itself to external controls for fencing, that I know of. Anyone using Cubix Blade servers? Mike On Tue, 24 Oct 2006 15:25:36 -0400, Greg Forte wrote: > check your documentation, or call your vendor. The power should be > > configurable at the enclosure level, not the individual blades. There > should be some sort of interface that you can log into and say "down the > power on the blade in slot X". Though this may be an add-on that you > haven't purchased. > > -g > > isplist@xxxxxxxxxxxx wrote: >> Each blade has one slot for an add on card which I've taken up for Fibre >> Channel cards. In my case at least, there's no room for anything else and >> I'm >> not sure there are any packages that handle external power controls for my >> machines. >> >> Mike >> >> >> On Tue, 24 Oct 2006 15:20:21 -0400, Neil Watson wrote: >>> Don't most blade centres come with remote management controllers? For >>> >>> example HP's iLO cards. >> >> >> -- >> Linux-cluster mailing list >> Linux-cluster@xxxxxxxxxx >> https://www.redhat.com/mailman/listinfo/linux-cluster -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
