since no one responded to my question, I tried stopping the services on
the first box:
service rgmanager stop
service gfs stop
service clvmd stop
service fenced stop
service cman stop
service ccsd stop
everything came down fine.
then I started em back up..
service ccsd start
this seemed to hang for about 2 minutes, then I got a panic..
as shown in the attached graphic..
this is on 2.6.9-34.ELsmp redhat Enterprise Linux AS release 4 (Nahant
Update 4)
running ccs-1.0.3-0,
cman-kernel-hugemem-2.6.9-43.8
cman-kernel-2.6.9-43.8
cman-1.0.4-0
cman-kernel-smp-2.6.9-43.8
cman-kernheaders-2.6.9-43.8
build from sources..
heres my cluster.conf
<?xml version="1.0"?>
<cluster config_version="22" name="progressive">
<fence_daemon clean_start="0" post_fail_delay="0"
post_join_delay="3"/>
<clusternodes>
<clusternode name="tf1" votes="1">
<fence>
<method name="1">
<device name="apc_power_switch"
option=" off"
port="1" switch="1"/>
<device name="apc_power_switch"
option=" off"
port="2" switch="1"/>
<device name="apc_power_switch"
option=" on"
port="1" switch="1"/>
<device name="apc_power_switch"
option=" on"
port="2" switch="1"/>
</method>
</fence>
</clusternode>
<clusternode name="tf2" votes="1">
<fence>
<method name="1">
<device name="apc_power_switch"
option=" off"
port="3" switch="1"/>
<device name="apc_power_switch"
option=" off"
port="4" switch="1"/>
<device name="apc_power_switch"
option=" on"
port="3" switch="1"/>
<device name="apc_power_switch"
option=" on"
port="4" switch="1"/>
</method>
</fence>
</clusternode>
</clusternodes>
<cman expected_votes="1" two_node="1"/>
<fencedevices>
<fencedevice agent="fence_apc" ipaddr="192.168.1.8"
login="xxx"
name="apc_power_switch" passwd="xxx"/>
</fencedevices>
<rm>
<failoverdomains>
<failoverdomain name="httpd" ordered="1"
restricted="1">
<failoverdomainnode name="tf1"
priority="1"/>
<failoverdomainnode name="tf2"
priority="2"/>
</failoverdomain>
</failoverdomains>
<resources>
<script file="/etc/init.d/httpd"
name="cluster_apache"/>
<fs device="/dev/mapper/diskarray-lv1"
fstype="ext3" mou
ntpoint="/mnt/gfs/htdocs" name="apache_content"/>
<ip address="192.168.1.7" monitor_link="1"/>
</resources>
<service autostart="1" domain="httpd" name="Apache
Service">
<ip ref="192.168.1.7"/>
<script ref="cluster_apache"/>
<fs ref="apache_content"/>
</service>
</rm>
</cluster>
ooh and shortly after the first box came back up, the second one got
rebooted automagically (power fenced from the first one im guessing) for
good measure.
but now the virtual address is working again.
any help appreciated
Jason
On Tue, Oct 17, 2006 at 09:37:15PM -0400, jason@xxxxxxxxxxxxxx wrote:
> so Ive had a test cluster running for quite a while now, both nodes of a 2 node cluster are up,
> but the virtual address seems to have disappeared.. its not pingable, neither server has it
> configured anymore.. The only application I had using the virtual address was apache (just for
> testing it). what logs/information should I be looking at to see what happened and why?
>
> regards,
> Jason
>
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster
--
================================================
| Jason Welsh jason@xxxxxxxxxxxxxx |
| http://monsterjam.org DSS PGP: 0x5E30CC98 |
| gpg key: http://monsterjam.org/gpg/ |
================================================
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
