Grant Waters wrote:
I had a quick search through your threads but couldn't find an exact
hit which includes a resolution so I thought I'd try posting this here.
We appear to lose eth1, and the MSA 500 G2 starts timing out, and by
the time I get in in the morning I can see errors on the MSA 500 G2
LCDs saying "43 REDUNDANCY FAILED" and "POWER OK" resepctively on the
secondary and primary controllers.
I've had the same problem, although I'm running RHEL 4. About 3 times
in the last year I've had failures where the nodes can no longer access
the MSA 500 G2, with the same errors shown on the controllers.
Each time HP has told me to "Upgrade the firmware" (and this is over
the course of a year or more at this point). Since the problem only
happens every few months, by the time it happens again HP has a new
firmware release out and they tell me to upgrade again.
Not much help to fix your fencing problem. But since your MSA 500 G2
problem is the same as mine, I figured it was worth a mention.
Thanks,
Eric Kerin
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
