On Wed, May 10, 2006 at 08:30:58AM -0400, Kovacs, Corey J. wrote: > Jason, couple of questions.... (And I assume you are working with > RHEL3+GFS6.0x) [root@tf1 cluster]# cat /etc/redhat-release Red Hat Enterprise Linux AS release 3 (Taroon Update 7) [root@tf1 cluster]# [root@tf1 cluster]# rpm -qa | grep -i gfs GFS-modules-smp-6.0.2.30-0 GFS-devel-6.0.2.30-0 GFS-debuginfo-6.0.2.30-0 GFS-6.0.2.30-0 GFS-modules-6.0.2.30-0 [root@tf1 cluster]# > > > 1. Are you actually using raw devices? if so, why? not intentionally.. ;) > 2. Does the device /dev/raw/raw64 actually exist on tf2? [root@tf2 cluster]# !ls ls -al /dev/raw/raw64 crw-rw---- 1 root disk 162, 64 Jun 24 2004 /dev/raw/raw64 [root@tf2 cluster]# [root@tf1 cluster]# !ls ls -al /dev/raw/raw64 crw-rw---- 1 root disk 162, 64 Jun 24 2004 /dev/raw/raw64 [root@tf1 cluster]# so theyre both there.. > > > GFS does not use raw devices for anything. The standard Redhat Cluster suite > does, but not GFS. GFS uses "storage pools". Also, if memory servs me right, > later versions of GFS for RHEL3 need to be told what pools to use in the > "/etc/sysconfig/gfs" config file. Used to be that GFS just did a scan and > "found" the pools, but no longer I believe. > in /etc/sysconfig/gfs on both boxes, I have CCS_ARCHIVE="/dev/sdb1" (everything else is commented out) regards, Jason -- Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
