On Thu, Dec 08, 2005 at 11:19:38AM -0700, busy admin wrote: > David, > > We are using cluster-1.00 code. I didn't see modifications under 1.01 > that would have an impact, but maybe I missed something. > > You are right, I see step 5 happen before step 4 (but remember, > sometimes it works fine specially after I run with 'fenced -D'). And > I have never seen any of these problems when I use IPMI or DRAC. > > BTW, for simplicity sake, I wasn't even running rgmanager. Just ccsd, > cman and fenced. Then I'm confused; I thought we defined the problem as step 5 (services starting on A) happening before step 4 (admin running fence_ack_manual). With no step 5, what's the problem? > On 12/8/05, David Teigland <teigland@xxxxxxxxxx> wrote: > > On Mon, Dec 05, 2005 at 07:04:38PM -0700, busy admin wrote: > > > What is the problem: > > > When running manual fencing and doing failover testing, my secondary > > > node takes over the service without waiting for a fence_ack_manual. > > > This all works perfectly with automatic fencing (ipmi, drac). > > > > We're going to try this here. Just to be clear, we expect: > > > > 1. A and B in cluster, in fence domain and running rgmanager > > 2. kill B > > 3. A should start fence_manual and print message in /var/log/messages > > 4. admin should run fence_ack_manual on A > > 5. services from B should fail over to A > > > > The problem is you're seeing 5 happen before 4. What version of the > > code are you using (cluster-1.01.00 ?) > > > > Thanks > > Dave > > > > -- Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
