Hi,
I am installing Redhat Cluster Suite in 2 HP Proliant DL380G4 with HP StorageWorks MSA500 G1.
I have 3 ethernet cards for each server. 1 card is used for heartbeat and 2 cards are configured as bond0 (bonding).
I have setup a service and the service runs on both node: node1 and node2. I can swing the service from node1 to node2.
However, when I shutdown node1 (using shutdown -h now), the service which was running in node1 is not restarted on node2.
I got the following error message in node2:
Sep 27 10:34:54 ppba-papp2 clusvcmgrd[1868]: <crit> Couldn't connect to member #0: Connection timed out
Sep 27 10:34:54 ppba-papp2 clusvcmgrd[1868]: <err> Unable to obtain cluster lock: No locks available
Sep 27 10:35:01 ppba-papp2 cluquorumd[1835]: <warning> Membership reports #0 as down, but disk reports as up: State uncertain!
Sep 27 10:35:05 ppba-papp2 clusvcmgrd[1868]: <warning> Member ppba-papp1's state is uncertain: Some services may be unavailable!
Is this test scenario valid ? Is it ok to test the Redhat Cluster by shutting down the server ? What could have gone wrong ?
Thanks.
Hanny
I am installing Redhat Cluster Suite in 2 HP Proliant DL380G4 with HP StorageWorks MSA500 G1.
I have 3 ethernet cards for each server. 1 card is used for heartbeat and 2 cards are configured as bond0 (bonding).
I have setup a service and the service runs on both node: node1 and node2. I can swing the service from node1 to node2.
However, when I shutdown node1 (using shutdown -h now), the service which was running in node1 is not restarted on node2.
I got the following error message in node2:
Sep 27 10:34:54 ppba-papp2 clusvcmgrd[1868]: <crit> Couldn't connect to member #0: Connection timed out
Sep 27 10:34:54 ppba-papp2 clusvcmgrd[1868]: <err> Unable to obtain cluster lock: No locks available
Sep 27 10:35:01 ppba-papp2 cluquorumd[1835]: <warning> Membership reports #0 as down, but disk reports as up: State uncertain!
Sep 27 10:35:05 ppba-papp2 clusvcmgrd[1868]: <warning> Member ppba-papp1's state is uncertain: Some services may be unavailable!
Is this test scenario valid ? Is it ok to test the Redhat Cluster by shutting down the server ? What could have gone wrong ?
Thanks.
Hanny
-- Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
