this config seems to have helped. a node went down again, but I was able to recover with fence_ack_manual. thanks, dan On 12, May, 2005, David Teigland declared: > On Thu, May 12, 2005 at 06:51:22AM -0400, Dan B. Phung wrote: > > Hi all, my cluster seems to be stuck! one of the nodes > > went down, and I see a message on one of the live nodes > > that repeatedly says: > > > > fencing node "blade12" > > fence "blade12" failed > > I've gone back to some of your previous messages where you included your > cluster.conf and you had fencing misconfigured. Here's how manual fencing > should look. Notice that the device name "human" under node refers to the > fencedevice with the same name below. > > <clusternode name="node01"> > <fence> > <method name="single"> > <device name="human" nodename="node01"/> > </method> > </fence> > </clusternode> > > > <fencedevices> > <fencedevice name="human" agent="fence_manual"/> > </fencedevices> > > If that doesn't help, please send your current cluster.conf. > Dave > -- -- Linux-cluster@xxxxxxxxxx http://www.redhat.com/mailman/listinfo/linux-cluster
