Hello, hopefully someone has ran into this and it's a quick fix. I'm using
a vanilla 2.6.9 kernel and the newest (as of tonite) cvs branch from
-rRHEL4. My sequence is to startup ccsd on both nodes, and then I try to
have both of them join (with a brief wait before I have the 2nd one try).
Here's what I get from the cman_tool's view of the nodes.
phung # cman_tool nodes
Node Votes Exp Sts Name
3 1 1 J blade03
4 1 1 M blade04
and in /var/log/messages, I see this:
CMAN: sending membership request
followed by many:
last message repeated 7 times
In addition I ran a tcpdump, and there seem to be UDP packets flying
around from node to node, using port 6809, so the network seems fine.
How would I debug this further? What kinds of tools are people using
to debug their config/setup?
here's my config.
<?xml version="1.0"?>
<cluster name="blade_cluster" config_version="3">
<fencedevices>
<fencedevice name="blade_san" agent="fence_manual"/>
</fencedevices>
<fence_daemon clean_start="0">
</fence_daemon>
<cman two_node="1" expected_votes="1">
<multicast addr="224.0.0.1"/>
</cman>
<clusternodes>
<clusternode name="blade03" nodeid="3" votes="1">
<multicast addr="224.0.0.1" interface="eth0"/>
<fence>
<method name="human">
<device name="last_resort" ipaddr="blade03"/>
</method>
</fence>
</clusternode>
<clusternode name="blade04" nodeid="4" votes="1">
<multicast addr="224.0.0.1" interface="eth0"/>
<fence>
<method name="human">
<device name="last_resort" ipaddr="blade04"/>
</method>
</fence>
</clusternode>
</clusternodes>
</cluster>
regards,
Dan
--
--
Linux-cluster@xxxxxxxxxx
http://www.redhat.com/mailman/listinfo/linux-cluster
