On Wed, 2004-10-20 at 16:19, Lazar Obradovic wrote: > fence_sanbox2 has been tested on SANBox2 8 and SANBox2 16 switches. It > uses CLI (telnet) for accessing switch. It uses "admin start" and "set > port <portnumer> state offline/online" commands. If SANBox 5200 uses the > same syntax / procedure for bringing the port down/up, it'll work for > you. I've just checked manual pages for SANBox2-64 and SANBox 5200, and they should work fine with fence_sanbox2, but I would very much like you to test it and let us know the results. -- Lazar Obradovic, System Engineer ----- laza@xxxxxx YUnet International http://www.EUnet.yu Dubrovacka 35/III, 11000 Belgrade Tel: +381 11 3119901; Fax: +381 11 3119901 ----- This e-mail is confidential and intended only for the recipient. Unauthorized distribution, modification or disclosure of its contents is prohibited. If you have received this e-mail in error, please notify the sender by telephone +381 11 3119901. -----
