On Wed, Feb 26, 2025 at 09:16:27AM +0800, Yu Kuai wrote:
> From: Yu Kuai <yukuai3@xxxxxxxxxx>
>
> The bio submission time may be a few jiffies more than the expected
> waiting time, due to 'extra_bytes' can't be divided in
> tg_within_bps_limit(), and also due to timer wakeup delay. In this
> case, adjust slice_start to jiffies will discard the extra wait time,
> causing lower rate than expected.
>
> This problem will cause blktests throtl/001 failure in case of
> CONFIG_HZ_100=y, fix it by preserving one finished slice in
> throtl_trim_slice() and allowing deviation between [0, 2 slices).
>
> For example, assume bps_limit is 1000bytes, 1 jiffes is 10ms, and
> slice is 20ms(2 jiffies), expected rate is 1000 / 1000 * 20 = 20 bytes
> per slice.
>
> If user issues two 21 bytes IO, then wait time will be 30ms for the
> first IO:
>
> bytes_allowed = 20, extra_bytes = 1;
> jiffy_wait = 1 + 2 = 3 jiffies
>
> and consider
> extra 1 jiffies by timer, throtl_trim_slice() will be called at:
>
> jiffies = 40ms
> slice_start = 0ms, slice_end= 40ms
> bytes_disp = 21
>
> In this case, before the patch, real rate in the first two slices is
> 10.5 bytes per slice, and slice will be updated to:
>
> jiffies = 40ms
> slice_start = 40ms, slice_end = 60ms,
> bytes_disp = 0;
>
> Hence the second IO will have to wait another 30ms;
>
> With the patch, the real rate in the first slice is 20 bytes per slice,
> which is the same as expected, and slice will be updated:
>
> jiffies=40ms,
> slice_start = 20ms, slice_end = 60ms,
> bytes_disp = 1;
>
> And now, there is still 19 bytes allowed in the second slice, and the
> second IO will only have to wait 10ms;
>
> Fixes: e43473b7f223 ("blkio: Core implementation of throttle policy")
> Reported-by: Ming Lei <ming.lei@xxxxxxxxxx>
> Closes: https://lore.kernel.org/linux-block/20250222092823.210318-3-yukuai1@xxxxxxxxxxxxxxx/
> Signed-off-by: Yu Kuai <yukuai3@xxxxxxxxxx>
Acked-by: Tejun Heo <tj@xxxxxxxxxx>
Thanks.
--
tejun
